Start › Cold planers › Roadtec › RX500

Roadtec RX500

Series: Roadtec Cold Planer

The photo shows the RX900 from the same series. Source: http://www.wirtgen-group.com/de-nl/news-und-media/wirtgen-gr

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Roadtec Cold Planer series from Roadtec includes the RX500. The engine delivers 608.3 hp (447.4 kW). Rated speed is 2,100 rpm. The tank holds 1,097.8 litres. The hydraulic tank holds 318 litres. The engine fitted is the QSX-15. The Roadtec Cold Planer series covers 3 models. Rated output within it ranges from 329.5 to 1,291.7 hp; the RX500 sits in the lower part of that range with 608.3 hp. Its immediate neighbours are the RX400 below it with 329.5 hp and the RX900 above it with 1,291.7 hp. 7 Roadtec models across 2 series are on record. The model is listed under Road construction. 6 verified figures from 1 source are on file.

Technical data

Engine

Engine modelQSX-15correct
Power608.3 hp (447.4 kW)correct
Rated speed2,100 rpmcorrect

Working data

Hydraulic oil capacity318 lcorrect
Fuel tank capacity1,097.8 lcorrect

Frequently asked questions

How much power does the Roadtec RX500 have?

The Roadtec RX500 delivers 608 hp.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

RX400

RX900

Sources: [1]

Asphalt paver in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare