Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Rm4x4 › TRX500FA6 T3

Rm4x4 TRX500FA6 T3

Built: 2019 · Series: Other models

More machines from model year 2019

The photo shows the TRX420FE1 from the same series. Source: https://www.technikboerse.com/en/haendler/patoux-motoculture

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The TRX500FA6 T3 comes from Rm4x4. Production: 2019. The engine delivers 20.1 kW, has 1 cylinder, with a displacement of 475 cm³. The machine is 2,178 mm long and 1,205 mm wide. The unladen weight is 405 kg. The gross vehicle weight is 558 kg. The gearbox offers 5 gears. Rated output across the Rm4x4 range ranges from 19.6 to 22.1 kW; the TRX500FA6 T3 sits in the lower part of that range with 20.1 kW. Its immediate neighbours are the TRX420FE1 below it with 19.7 kW and the TRX500FE2 T3 above it with 21.4 kW. Unladen weight across the Rm4x4 range ranges from 355 to 429 kg; here the TRX500FA6 T3 sits in the upper part of that range with 405 kg. 7 Rm4x4 models are on record.

RM4X4 – other models: the collective page of four-wheel-drive quads outside the named ranges, from the TRX420FE1 through the TRX500FA6 to the TRX520FE2, 19.6 to 22.1 kW, single-cylinder engines of 420 to 518 cm³

This page gathers the RM4X4 vehicles the register could not assign to a named range – four-wheeled quads with a single-cylinder engine throughout. The designations TRX420 and TRX520 give the approximate displacement class, with the TRX500 in between; the abbreviations FE1, FA6 and FE2 distinguish equipment and transmission variants, the T3 suffix an emission stage. The brand name 4X4 refers to the selectable or permanent four-wheel drive that sets these quads apart from two-wheel-drive-only models.

Read on 3 more paragraphs

The register lists here 7 versions with 19.6 to 22.1 kW from single-cylinder engines of 420 to 518 cm³, unladen weights from 355 to 429 kg, gross weights from 465 to 558 kg, lengths from 2,151 to 2,196 mm and a width of 1,205 mm.

Quads of this power class are used in farming for herd checks and light haulage as well as in hunting and forestry, where four-wheel drive provides traction on unpaved ground and slopes. Compared with larger utility vehicles, they score with low ground pressure and the ability to negotiate narrow paths and dense undergrowth.

Used, the condition of the engine and clutch, the propshaft and differential of the four-wheel drive, brakes, axle boots and tyres count, and on models with automatic transmission the condition of the variator and belt; parts run through the respective importer. On machines previously used in hunting or forestry, it is also worth checking the trailer and plough mounting points and rust on the frame and underbody.

Sources: SpecCodex register, model data: RM4X4 (weitere Modelle)

Technical data

Engine

Power20.1 kWcorrect
Cylinders1correct
Displacement475 cm³correct

Dimensions and weights

Length2,178 mmcorrect
Width1,205 mmcorrect
Unladen weight405 kgcorrect
Gross vehicle weight558 kgcorrect

Drivetrain and chassis

Gears5correct

Where this model stands

Power-to-weight ratio: 49.6 kW/t (20 kW / 0.4 t)

Power class: Compact (< 40 hp)

Stronger than 15% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Rm4x4 TRX500FA6 T3 have?

The Rm4x4 TRX500FA6 T3 delivers 20.1 kW.

How much does the Rm4x4 TRX500FA6 T3 weigh?

The unladen weight is 405 kg.

What is the gross vehicle weight of the Rm4x4 TRX500FA6 T3?

558 kg.

What engine does the Rm4x4 TRX500FA6 T3 have?

1 cylinders, 475 cm³ displacement.

What are the dimensions of the Rm4x4 TRX500FA6 T3?

2,178 mm × 1,205 mm.

When was the Rm4x4 TRX500FA6 T3 built?

Production years: 2019.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare