Reydams REY-P-2631
Built: 2000 · Series: Other models
More machines from model year 2000
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Reydams – other models: the collective page of the heavy trucks with the REY-P type designations outside the named ranges, the REY-P-2631 and REY-P-P94, six-cylinders of 9,000 to 11,194 cm³
This page gathers the Reydams vehicles the register could not assign to a named range – the REY-P-2631 and REY-P-P94, also listed under the full Reydams designation. The type designations with the REY-P prefix mark two models of heavy, long trucks with very similar dimensions.
Read on 4 more paragraphs
The register lists here 4 versions from six-cylinders of 9,000 to 11,194 cm³, unladen weights from 13,424 to 14,400 kg, gross weights from 18,200 to 26,000 kg, lengths from 11,800 to 11,850 mm and widths from 2,520 to 2,550 mm.
With lengths of nearly twelve metres and gross weights of up to 26 tonnes on only two axle classes in the data, these vehicles belong to the heavy and special-load transport segment, where long wheelbases and high payloads are required.
On these heavy trucks, the condition of the engine and gearbox, the frame and axles, the braking system, and, on such long chassis, the frame's freedom from twist and corrosion of the cab and body all count; given the small number of units, spare parts can usually only be obtained directly from the manufacturer or through reproduction.
With gross vehicle weights from 18,200 to 26,000 kg, these vehicles belong to EU class N3 (over 12 t); operating them requires a category CE driving licence, a tachograph and compliance with driving and rest times, plus, on most European long-haul roads, a distance-based toll. The great length of almost twelve metres, with only two axle classes recorded, points to a design as a rigid vehicle with a long load bed rather than as a tractor unit.
Sources: SpecCodex register, model data: Reydams – weitere Modelle
Technical data
Engine
| Cylinders | 6correct |
|---|---|
| Displacement | 11,194 cm³correct |
Dimensions and weights
| Length | 11,850 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 7,360 mmcorrect |
| Unladen weight | 14,400 kgcorrect |
| Gross vehicle weight | 26,000 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|
Frequently asked questions
How much does the Reydams REY-P-2631 weigh?
The unladen weight is 14,400 kg.
What is the gross vehicle weight of the Reydams REY-P-2631?
26,000 kg.
What engine does the Reydams REY-P-2631 have?
6 cylinders, 11,194 cm³ displacement.
What are the dimensions of the Reydams REY-P-2631?
11,850 mm × 2,550 mm.
When was the Reydams REY-P-2631 built?
Production years: 2000.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
