Renders TAN 3 – specifications
Built: 1993 · Series: TAN
Data for the version built 1993 · Data origin: Official register · sources
More machines from model year 1993
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Renders TAN – two- to four-axle semi-trailers from the Netherlands: the TAN 2/3/4 range, unladen weight up to 11.2 t, gross weight up to 40 t, lengths up to 13.85 m
Renders also builds the TAN range in the Netherlands, covering semi-trailers with two to four axles: the digits 2, 3 and 4 in the designations TAN 2, TAN 3 and TAN 4 indicate the number of axles, while suffixes such as 2-1, 3W or 4-1L mark build and equipment variants of the same basic type. As with other Renders ranges, the chassis is designed for tipping and bulk-goods bodies.
Read on 3 more paragraphs
The register lists 9 versions with unladen weights from 5,300 to 11,240 kg at a gross weight of 18,000 to 40,000 kg. Lengths range from 8,880 to 13,850 mm, widths from 2,500 to 2,700 mm – the spread reflecting the range's differing axle counts.
With chassis from two to four axles, the TAN range covers a wide field of use, from more compact trailers for urban building sites to long, heavy tippers for long-haul transport of bulk goods, excavated earth or agricultural bulk cargo. Renders competes here with other Benelux makers of tipping and tandem-axle semi-trailers.
When buying used, the frame and axle suspension need particular attention on the higher-axle-count versions, along with the tipping ram or moving floor, air suspension, braking system with ABS/EBS, and the kingpin and landing gear. The condition of the sideboards and load floor and their resistance to moisture determine remaining service life; spare parts run through Dutch and Belgian commercial-vehicle dealers.
Sources: SpecCodex register, model data: Renders TAN, Zulassungsdaten RDW (Niederlande)
Technical data
Dimensions and weights
| Length | 11,200 mmcorrect |
|---|---|
| Width | 2,500 mmcorrect |
| Unladen weight | 8,740 kgcorrect |
| Gross vehicle weight | 37,000 kgcorrect |
Frequently asked questions
How much does the Renders TAN 3 weigh?
The unladen weight is 8,740 kg.
What is the gross vehicle weight of the Renders TAN 3?
37,000 kg.
What are the dimensions of the Renders TAN 3?
11,200 mm × 2,500 mm.
When was the Renders TAN 3 built?
Production years: 1993.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · Data sources and cross-checks
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
