Start › Trailers › Renders › RPS10

Renders RPS10

Built: 2005-2006 · Series: Other models

More machines from model year 2005

Source: https://www.kleinanzeigen.de/s-anzeige/renders-3-achs-tiefla

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The RPS10 comes from Renders. Production: 2005-2006. The machine is 12,815 mm long and 2,475 mm wide. The unladen weight is 4,860 kg. The gross vehicle weight is 43,000 kg. Unladen weight across the Renders range ranges from 2,140 to 25,600 kg; the RPS10 sits at the bottom of that range with 4,860 kg. Its immediate neighbours are the SO 4G11 below it with 4,820 kg and the NS3A31 above it with 4,870 kg. 268 Renders models are on record. The model is listed under Trailers. 5 verified figures from 1 source are on file.

Technical data

Dimensions and weights

Length12,815 mmcorrect
Width2,475 mmcorrect
Unladen weight4,860 kgcorrect
Gross vehicle weight43,000 kgcorrect

Frequently asked questions

How much does the Renders RPS10 weigh?

The unladen weight is 4,860 kg.

What is the gross vehicle weight of the Renders RPS10?

43,000 kg.

What are the dimensions of the Renders RPS10?

12,815 mm × 2,475 mm.

When was the Renders RPS10 built?

Production years: 2005-2006.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

- -

-, UOPLYST

10.10 NA

10.20 E

1000

12-27 NA

12-27NA

12.18E

12.20NA

12.27 CC

12.27DK

201

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare