Start › Trailers › Renders › RD 8.8

Renders RD 8.8

Built: 1999-1999 · Series: Other models

More machines from model year 1999

Source: https://www.agrarheute.com/technik/reisch-rd-80-kipper-fuer-

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Renders RD 8.8 is a machine built by Renders. Production: 1999. The machine is 5,030 mm long and 2,530 mm wide. The unladen weight is 2,800 kg. The gross vehicle weight is 16,000 kg. Unladen weight across the Renders range ranges from 2,140 to 25,600 kg; the RD 8.8 sits at the bottom of that range with 2,800 kg. Its immediate neighbours are the RD9.9 below it with 2,740 kg and the ROC 12.27 COMP above it with 2,940 kg. 268 Renders models are on record. The model is listed under Trailers. 5 verified figures from 1 source are on file.

Technical data

Dimensions and weights

Length5,030 mmcorrect
Width2,530 mmcorrect
Unladen weight2,800 kgcorrect
Gross vehicle weight16,000 kgcorrect

Frequently asked questions

How much does the Renders RD 8.8 weigh?

The unladen weight is 2,800 kg.

What is the gross vehicle weight of the Renders RD 8.8?

16,000 kg.

What are the dimensions of the Renders RD 8.8?

5,030 mm × 2,530 mm.

When was the Renders RD 8.8 built?

Production years: 1999.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

- -

-, UOPLYST

10.10 NA

10.20 E

1000

12-27 NA

12-27NA

12.18E

12.20NA

12.27 CC

12.27DK

201

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare