Renders RAC 9.9
Built: 2011 · Series: RAC
More machines from model year 2011
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Renders RAC – the large tipping-trailer series from the Belgian farm-equipment maker: 14 versions from RAC 9.18 to RAC 18.20, unladen weight 3.95 to 7.76 t, gross weight 18 to 38 t
RAC is the series of large tipping and transport trailers built by Renders, the Belgian agricultural-equipment manufacturer. Type codes such as RAC 9.18, RAC 10.20 and RAC 18.20 combine two figures for axle load and load capacity of each version, with letters such as E or N marking equipment variants. The series is mainly used in sugar-beet and grain harvesting and in earthworks, where high payload combined with a limited road width matters.
Read on 3 more paragraphs
The register lists 14 versions with unladen weights from 3,950 to 7,760 kg and gross weights from 18,000 to 38,000 kg. Lengths range from 7,550 to 11,750 mm, widths from 2,480 to 2,600 mm.
Trailers of this size haul grain, sugar beet, silage or spoil, adding tens of tonnes of payload to a tractor in farming and earthworks; Renders competes in this segment with Joskin, Fliegl and Veenhuis. The permitted width of up to 2,600 mm keeps the trailers within the standard road width without a special permit.
When buying used, check the tipping body and hydraulic rams, axles and brakes, sides and tarpaulin, and the hydraulic hitch-up to the tractor; spare parts are available through the Renders dealer network. Because of contact with fertiliser and damp crop, rust protection on the tipping body and frame deserves particular attention. Worn tipping-hinge bushings are also a common wear point on high-mileage examples.
Sources: SpecCodex register, model data: Renders RAC
Technical data
Dimensions and weights
| Length | 8,450 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 4,930 mmcorrect |
| Unladen weight | 4,380 kgcorrect |
| Gross vehicle weight | 18,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Renders RAC 9.9 weigh?
The unladen weight is 4,380 kg.
What is the gross vehicle weight of the Renders RAC 9.9?
18,000 kg.
Up to what speed is the Renders RAC 9.9 approved?
Approved up to 100 km/h.
What are the dimensions of the Renders RAC 9.9?
8,450 mm × 2,550 mm.
When was the Renders RAC 9.9 built?
Production years: 2011.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
RAC 10-10
RAC 10-10 L15
RAC 10.10 NA
RAC 10.18
RAC 10.20
RAC 10.20 N
RAC 1010 F
RAC 18.20
RAC 9-18
RAC 9.18 E
RAC 9.18 NA
RAC 918 E
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.