Renders Has FCCA08E
Built: 2018-2019 · Series: Other models
More machines from model year 2018
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Renders Has – other models: the collective page of container semi-trailers outside the named ranges, FCCA type series and Multi-Dolly, gross vehicle weight 39 t, lengths up to 13.3 m
This page gathers the Renders Has container semi-trailers the register could not assign to a named range. The model names state the vehicle type directly: 'Extendable Container Carrier' for skeletal semi-trailers that extend to carry containers of different lengths, 'Container Carrier' for the fixed version; the FCCA08E/EY/FY type series distinguishes equipment variants, and the 'Euro 800 Multi-Dolly' adds an axle dolly for semi-trailer combinations to the range.
Read on 3 more paragraphs
The register lists 8 versions here with kerb weights from 2,940 to 6,200 kg, a gross vehicle weight of 39,000 kg, lengths from 7,888 to 13,320 mm and widths from 2,430 to 2,550 mm.
As extendable skeletal semi-trailers for maritime and swap containers, the models on this collective page serve port-hinterland and combined transport, where the same platform is adjusted to the container length rather than keeping a separate semi-trailer for each length. Hauliers value this above all for the smaller fleet size, since one platform covers several container lengths.
Buying used, check the extension mechanism and its locking in every frame position, the twist-locks for wear, the frame and chassis rails for cracks, the axle units and brake system, and the kingpin and support legs. Spare parts for extension frames and twist-locks run through the Renders dealer network and the container-technology trade.
Sources: SpecCodex register, model data: Renders Has (weitere Modelle)
Technical data
Dimensions and weights
| Length | 13,320 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 9,100 mmcorrect |
| Unladen weight | 5,750 kgcorrect |
| Gross vehicle weight | 39,000 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Renders Has FCCA08E weigh?
The unladen weight is 5,750 kg.
What is the gross vehicle weight of the Renders Has FCCA08E?
39,000 kg.
Up to what speed is the Renders Has FCCA08E approved?
Approved up to 100 km/h.
What are the dimensions of the Renders Has FCCA08E?
13,320 mm × 2,550 mm.
When was the Renders Has FCCA08E built?
Production years: 2018-2019.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
3 Axled Semi-Trailer-Container Carrier
EURO 800 MULTI-DOLLY (KHV,LZV)
FCCA08EY (EXTENDABLE CONTAINER CARRIER)
FCCA08FY
FCCA08FY (CONTAINER CARRIER)
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
