Renault HR 400-19 PR
Built: 2001 · Series: HR
More machines from model year 2001
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Renault HR – collective page of heavy Renault tractor units and trucks: six-cylinder engines of 11.1 litres displacement, 18.6 to 27 tonnes gross weight, pusher-axle versions
This page gathers heavy Renault trucks and tractor units with the HR type designation, whose engines of around eleven litres and six cylinders correspond to the heavy ranges of Renault Véhicules Industriels. The company was formed in 1978 from the merger of Renault's commercial-vehicle division with Berliet and Saviem, and has traded since 2002 as Renault Trucks within the Volvo Group; the heavy ranges are still built at the Blainville-sur-Orne plant in Normandy. The suffixes in the model names, such as T for Tracteur (tractor unit) and PUSHER for a non-driven trailing axle ahead of the drive axle, describe the chassis and axle configuration of each version.
Read on 3 more paragraphs
The register lists here 11 versions, all from six-cylinder engines of around 11.1 litres, unladen weights from 6,450 to 16,240 kg, gross weights from 18,600 to 27,000 kg, lengths from 5,820 to 11,940 mm and widths from 2,500 to 2,600 mm.
Heavy Renault ranges of this generation competed directly with Mercedes-Benz, Volvo, Scania and DAF in European long-haul and construction-site transport; the pusher-axle versions were used above all on tipper and concrete-mixer bodies, where the extra axle increases payload.
On used examples, rust on the frame and fittings, the condition of the clutch and manual gearbox, the tightness of the injection system and, on the pusher axles, their steering and bearings count; parts run through the Renault Trucks and Volvo Group network.
Sources: SpecCodex register, model data: Renault HR, Renault Trucks (manufacturer)
Technical data
Engine
| Cylinders | 6correct |
|---|
Dimensions and weights
| Length | 11,940 mmcorrect |
|---|---|
| Width | 2,600 mmcorrect |
| Wheelbase | 6,790 mmcorrect |
| Unladen weight | 11,880 kgcorrect |
| Gross vehicle weight | 18,600 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Renault HR 400-19 PR weigh?
The unladen weight is 11,880 kg.
What is the gross vehicle weight of the Renault HR 400-19 PR?
18,600 kg.
What engine does the Renault HR 400-19 PR have?
6 cylinders.
What are the dimensions of the Renault HR 400-19 PR?
11,940 mm × 2,600 mm.
When was the Renault HR 400-19 PR built?
Production years: 2001.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
HR 320-19 PR
HR 340-19 PR
HR 370-19 T
HR 385-19T
HR 385-27MJ ZD
HR 400 19T 36 C/C
HR 400-19 T
HR 420-19 T
HR 420-25 T PUSHER
HR 420-26 T PUSHER
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
