Renault Ceres 85 X (A)
Built: 11/1994–9/1998 · Series: CERES-X Baureihe
More machines from model year 1994
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Renault CERES-X series – four-cylinder tractors from Renault Agriculture: Ceres 85 X (A) and Ceres 95 X (A), 55.2 to 62.6 kW, 3,920 to 4,625 cm³, 261 to 289 Nm
The CERES-X range from Renault Agriculture of Le Mans also carries the name of the Roman goddess of agriculture, Ceres. It comprises the Ceres 85 X (A) and Ceres 95 X (A) models, whose A suffix marks an equipment variant. The X suffix in the model designation marked, for Renault, a particular equipment and technology level within this range.
Read on 3 more paragraphs
The register lists here 2 versions with 55.2 to 62.6 kW from four-cylinder engines of 3,920 to 4,625 cm³, an unladen weight of 3,455 to 3,480 kg, a length of 4,087 mm, a width of 1,929 mm, a height of 2,550 mm, torque of 261 to 289 Nm and a rated speed of 2,350 rpm.
The Ceres-X range covered the mid power band of the Renault line-up and targeted medium-sized arable and grassland farms in France and the rest of Western Europe. It thus occupied a market segment between the more compact standard tractors and the large Renault ranges of the time.
Buyers of used units should check the injection system, clutch and gearbox, as well as the hydraulics, cab seals and rust on the frame; spares run through the Claas dealer network, which took over support for the older Renault ranges. Before purchase it is also worth checking the front axle, steering and the condition of the hydraulic lines. A look at the service history helps assess how the tractor has been used.
Sources: SpecCodex register, model data: Renault CERES-X Baureihe
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 75 hp (55.2 kW)correct |
| Rated speed | 2,350 rpmcorrect |
| Torque | 261 Nmcorrect |
| Speed at max. torque | 1,341 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 4,625 cm³correct |
| Bore | 106.5 mmcorrect |
| Stroke | 127 mmcorrect |
| Compression ratio | 17.2correct |
| Injection pressure | 245 barcorrect |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 4,087 mmcorrect |
|---|---|
| Width | 1,929 mmcorrect |
| Height | 2,550 mmcorrect |
| Wheelbase | 2,470 mmcorrect |
| Ground clearance | 490 mmcorrect |
| Unladen weight | 3,480 kgcorrect |
Drivetrain and chassis
| Drive | rear- or four-wheel drivecorrect |
|---|---|
| Gearbox | 18 V/18 R or 20 V/20 Rcorrect |
| Front tyres | 7.50-18 ASF (A: 13.6 R 24 AS)correct |
| Rear tyres | 16.9 R 34 AScorrect |
| Top speed | 30 km/hcorrect |
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|---|
| Units built | 49 (A: 596)correct |
Where this model stands
Power-to-weight ratio: 15.9 kW/t (55 kW / 3.5 t)
Power class: Universal (40–100 hp)
Stronger than 52% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Renault Ceres 85 X (A) have?
The Renault Ceres 85 X (A) delivers 75 hp.
How much does the Renault Ceres 85 X (A) weigh?
The unladen weight is 3,480 kg.
What engine does the Renault Ceres 85 X (A) have?
4 cylinders, 4,625 cm³ displacement, Diesel.
How fast does the Renault Ceres 85 X (A) go?
Top speed is 30 km/h.
What are the dimensions of the Renault Ceres 85 X (A)?
4,087 mm × 1,929 mm × 2,550 mm.
When was the Renault Ceres 85 X (A) built?
Production years: 11/1994–9/1998.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 26 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.