Renault Ceres 95 (A)
Built: 6/1992–7/1995 · Series: CERES-Baureihe
More machines from model year 1992
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Renault Ceres: new names for a new decade, 54 to 83 hp, three- and four-cylinder diesels on the engine base of the MX series
With the Ceres series, Renault Agriculture introduced its new naming family in the early 1990s, replacing numeric codes with model names from then on — named after the Roman goddess of agriculture.
Read on 4 more paragraphs
The register lists 7 live models, from the Ceres 65 (A) to the Ceres 95 (A), built between 1992 and 1998. Output ranges from 39.7 to 61.1 kW, weight from 2,805 to 3,330 kg, displacement from 3,117 to 4,156 cm3, across three- and four-cylinder engines.
Engine base and displacement largely match the preceding MX series, but Renault noticeably reworked the cab, hydraulics and control layout for the new decade.
The Ceres series positioned itself as a solid mid-range line between the more compact Temis models and the larger Ares models introduced in the same period.
When buying a used Ceres, clutch and gearbox condition, the tightness of the reworked hydraulics, and rust on the new cab and mudguards matter; since the engine base matches the preceding MX series, wear parts for the injection system and cooling are usually identical and available. Parts have run through the Claas parts network since Renault Agriculture's dissolution. PTO and three-point hitch correspond in this power class to ISO 730 Category I to II, at 540 rpm. As the category rises, the lift-arm pin diameter grows too, which can make older, lower-category implements incompatible.
Sources: SpecCodex register, model data: Renault Ceres-Baureihe
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 83 hp (61.1 kW)correct |
| Rated speed | 2,350 rpmcorrect |
| Torque | 276 Nmcorrect |
| Speed at max. torque | 1,481 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 4,156 cm³correct |
| Bore | 105 mmcorrect |
| Stroke | 120 mmcorrect |
| Compression ratio | 16.6correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 3,870 mmcorrect |
|---|---|
| Width | 1,860 mmcorrect |
| Height | 2,550 mmcorrect |
| Wheelbase | 2,430 mmcorrect |
| Ground clearance | 490 mmcorrect |
| Unladen weight | 3,330 kgcorrect |
Drivetrain and chassis
| Drive | rear- or four-wheel drivecorrect |
|---|---|
| Gearbox | 18 V/18 R or 20 V/20 Rcorrect |
| Front tyres | 9.00-16 ASF (A: 13.6 R 24 AS)correct |
| Rear tyres | 16.9 R 34 AScorrect |
| Top speed | 30 km/hcorrect |
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|---|
| Units built | 24 (A: 290)correct |
Where this model stands
Power-to-weight ratio: 18.3 kW/t (61 kW / 3.3 t)
Power class: Universal (40–100 hp)
Stronger than 57% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Renault Ceres 95 (A) have?
The Renault Ceres 95 (A) delivers 83 hp.
How much does the Renault Ceres 95 (A) weigh?
The unladen weight is 3,330 kg.
What engine does the Renault Ceres 95 (A) have?
4 cylinders, 4,156 cm³ displacement, Diesel.
How fast does the Renault Ceres 95 (A) go?
Top speed is 30 km/h.
What are the dimensions of the Renault Ceres 95 (A)?
3,870 mm × 1,860 mm × 2,550 mm.
When was the Renault Ceres 95 (A) built?
Production years: 6/1992–7/1995.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 25 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.