Reisch Martin RHKS-3-SR08
Built: 2020-2021 · Series: Other models
More machines from model year 2020
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Reisch Martin – other tipper models: the collective page of tipping trailers from Martin Reisch of Leutkirch outside the named ranges, the RHKS range from the SR07 to the 35/24 SL/AL, 20,000 to 43,000 kg gross weight
This page gathers the tipping trailers from Martin Reisch of Leutkirch im Allgäu the register could not assign to a named range. The RHKS type range, with the SR07 and SR08 suffixes and the 35/24 SL and AL, covers several versions of tipping trailer at the width of a standard semi-trailer, around 2.55 m, as used in construction for hauling spoil and bulk material. Depending on the version, this gives a payload of around 11.5 to 37 tonnes.
Read on 3 more paragraphs
The register lists here 4 versions with unladen weights from 6,100 to 8,450 kg, gross weights from 20,000 to 43,000 kg, lengths from 8,550 to 11,510 mm and widths from 2,550 to 2,570 mm.
Martin Reisch is one of the vehicle builders in southern Germany specialising in tipping trailers and semi-trailers, and supplies chiefly construction and haulage firms moving bulk material, spoil or recycled material in shuttle runs. As tipping trailers, the vehicles are built for short runs and frequent loading and unloading, and often supplement tractor units or trucks with a trailer coupling in a fleet.
On used tippers, the condition of the tipping ram and hydraulic lines, the tightness of the load bed, the axles and braking system, and the frame and side panels for rust and deformation count; parts run through the commercial-vehicle and tipper trade.
Sources: SpecCodex register, model data: Reisch Martin (weitere Modelle)
Technical data
Dimensions and weights
| Length | 9,450 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 6,200 mmcorrect |
| Unladen weight | 7,690 kgcorrect |
| Gross vehicle weight | 43,000 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Reisch Martin RHKS-3-SR08 weigh?
The unladen weight is 7,690 kg.
What is the gross vehicle weight of the Reisch Martin RHKS-3-SR08?
43,000 kg.
Up to what speed is the Reisch Martin RHKS-3-SR08 approved?
Approved up to 100 km/h.
What are the dimensions of the Reisch Martin RHKS-3-SR08?
9,450 mm × 2,550 mm.
When was the Reisch Martin RHKS-3-SR08 built?
Production years: 2020-2021.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
