Rampf Faba RF-SD SA 5.25
Built: 1996 · Series: Other models
More machines from model year 1996
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Rampf Faba – other models: the collective page of trailers outside the named ranges, from the RF SA-6LF and SA-6 PF to the SDB 52 39 61, 5,250 to 6,500 kg gross weight
This page gathers the Rampf Faba trailers the register could not assign to a named range. The designation RF-SD SA 5.25 states with the figure 5.25 a gross weight of 5.25 tonnes directly, matching the minimum recorded in the register; the SA-6 PF and RF SA-6LF sit with the digit 6 in the same size bracket, and the SDB 52 39 61 rounds out the range with its own string of digits. Depending on the version, this gives a payload of around 2.85 to 4.7 tonnes.
Read on 3 more paragraphs
The register lists here 4 versions with unladen weights from 1,800 to 2,400 kg, gross weights from 5,250 to 6,500 kg, lengths from 6,270 to 8,250 mm and widths from 2,200 to 2,320 mm.
With payloads of around 2.85 to 4.7 tonnes and lengths of over 8 m, these trailers sit in the mid-range of tandem trailers used in trades, in machinery and vehicle transport, and in agricultural dealing for moving implements and small machines. Such trailers are usually traded through regional commercial-vehicle dealers and often used with interchangeable bodies for different types of load.
On used trailers, the axles and braking system, the frame and load floor for rust and wear, the drawbar's overrun device, and the lighting and underrun guard for road approval count; parts run through the trailer trade.
Sources: SpecCodex register, model data: Rampf Faba (weitere Modelle)
Technical data
Dimensions and weights
| Length | 6,400 mmcorrect |
|---|---|
| Width | 2,200 mmcorrect |
| Wheelbase | 3,640 mmcorrect |
| Unladen weight | 2,050 kgcorrect |
| Gross vehicle weight | 5,955 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Rampf Faba RF-SD SA 5.25 weigh?
The unladen weight is 2,050 kg.
What is the gross vehicle weight of the Rampf Faba RF-SD SA 5.25?
5,955 kg.
Up to what speed is the Rampf Faba RF-SD SA 5.25 approved?
Approved up to 100 km/h.
What are the dimensions of the Rampf Faba RF-SD SA 5.25?
6,400 mm × 2,200 mm.
When was the Rampf Faba RF-SD SA 5.25 built?
Production years: 1996.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
