Rakos Volkswagen CRAFTER
Built: 2024 · Series: Other models
More machines from model year 2024
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Rakos/Volkswagen – collective page of Crafter and Transporter chassis with third-party bodies outside the named series: 1,968 cc four-cylinder diesel, gross weight 3,000 to 3,500 kg
This collective page lists Volkswagen chassis carrying the Rakos body designation, which the register has not assigned to a named series of its own. The designations Crafter and Transporter point to the two VW series on which the bodies are fitted here – the Crafter as the larger, the Transporter as the mid-size VW commercial series.
Read on 4 more paragraphs
The register lists here 2 versions with a 1,968 cc four-cylinder engine, kerb weights from 2,003 to 2,053 kg, gross weights from 3,000 to 3,500 kg, lengths from 5,350 to 5,930 mm and widths from 1,970 to 2,320 mm.
Chassis with third-party bodies on a VW base serve trades and businesses as box, van or special bodies, with the choice between Crafter and Transporter depending on the load volume and payload needed within the 3 to 3.5-tonne class.
The Crafter and Transporter differ fundamentally in their drivetrains: the Crafter is rear-wheel drive and shares its chassis with the Mercedes Sprinter, while the T6 Transporter is front-wheel drive as standard and only drives the rear wheels as well with the optional 4Motion system.
When buying used, check the condition and tightness of the body, rust on the chassis frame beneath the body mounting, the condition of the clutch, dual-mass flywheel and brakes on the VW base, and the separate parts supply through Volkswagen for the chassis and through the bodybuilder.
Sources: SpecCodex register, model data: Rakos/Volkswagen
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 1,968 cm³correct |
Dimensions and weights
| Length | 5,930 mmcorrect |
|---|---|
| Width | 1,970 mmcorrect |
| Wheelbase | 3,640 mmcorrect |
| Unladen weight | 2,053 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Rakos Volkswagen CRAFTER weigh?
The unladen weight is 2,053 kg.
What is the gross vehicle weight of the Rakos Volkswagen CRAFTER?
3,500 kg.
What engine does the Rakos Volkswagen CRAFTER have?
4 cylinders, 1,968 cm³ displacement.
What are the dimensions of the Rakos Volkswagen CRAFTER?
5,930 mm × 1,970 mm.
When was the Rakos Volkswagen CRAFTER built?
Production years: 2024.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
