Rahtipro VTE-35L
Built: 2026-2026 · Series: Other models
More machines from model year 2026
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Rahtipro – other models: the collective page of trailers outside the named ranges, from the LRP-435 to the VTW 16, 610–1,030 kg unladen weight, 3,500 kg gross weight
This page gathers the trailers of the Finnish brand Rahtipro that the register could not assign to a named range; the brand name is made up of the Finnish words "rahti" (freight) and "pro". The seven types listed run from the LRP-435, LRP-8000 and LRP-9000 through the VT W16 and VTW 16 to the VTE-35L and VTK-35. By gross weight all types fall into EU vehicle class O2, right at the 3.5-tonne limit.
Read on 3 more paragraphs
The register lists here 7 versions with unladen weights from 610 to 1,030 kg, each at a gross weight of 3,500 kg. Length runs from 6,370 to 10,485 mm, width from 2,100 to 2,590 mm.
The combination of low unladen weight, a gross weight consistently at the 3.5-tonne limit and lengths of over 10 m is typical of trailers that can still be towed on an ordinary car licence, for instance for boats or long loads.
On a used purchase, the condition of the drawbar and overrun brake, corrosion on the chassis, tyre condition and, on the long types, the soundness of the frame extension all count; spare parts run through the open trailer-parts trade.
Sources: Kennwerte der Modelle Rahtipro (weitere Modelle), Traficom (Finnland)
Technical data
Dimensions and weights
| Length | 9,560 mmcorrect |
|---|---|
| Width | 2,520 mmcorrect |
| Unladen weight | 835 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Frequently asked questions
How much does the Rahtipro VTE-35L weigh?
The unladen weight is 835 kg.
What is the gross vehicle weight of the Rahtipro VTE-35L?
3,500 kg.
What are the dimensions of the Rahtipro VTE-35L?
9,560 mm × 2,520 mm.
When was the Rahtipro VTE-35L built?
Production years: 2026.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.