Raaf RO 25
Built: 1977-1977 · Series: Other models
More machines from model year 1977
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Raaf – other models: the collective page of heavy trailers outside the named ranges, from the RDC 9-9 and RO 25 to the RTCK 20/23 and S4203E, 28,000 to 34,000 kg gross weight
This page gathers the Raaf trailers the register could not assign to a named range. The RDC 9-9, RO 25, RTCK 20, RTCK 23 and S4203E types are heavy, multi-axle vehicles with a width of up to 2.54 m and lengths from just over 7 to almost 14 m, of the kind found among tipping or platform trailers and semi-trailers in the heavy segment. Depending on the version, the gap between unladen weight and gross weight gives a payload of around 20 to 29 tonnes.
Read on 3 more paragraphs
The register lists here 5 versions with unladen weights from 4,850 to 7,840 kg, gross weights from 28,000 to 34,000 kg, lengths from 7,050 to 13,800 mm and widths from 2,450 to 2,540 mm.
With payloads of 20 tonnes and more, these trailers belong to the heavy-transport segment used in construction, recycling and bulk-material logistics, where multi-axle trailers run behind tractor units or as a drawbar trailer in a combination with a semi-trailer. Such trailers change hands frequently on the used market and often stay in service for many years behind different tractor units.
On used trailers, the condition of axles, suspension and braking system – on air suspension also the bellows and valves – the frame and fittings for rust and deformation, the operation of tipping rams or load platforms, and tyres and rims count; parts run through the commercial-vehicle and trailer trade.
Technical data
Dimensions and weights
| Width | 2,500 mmcorrect |
|---|---|
| Wheelbase | 760 mmcorrect |
| Unladen weight | 6,482 kgcorrect |
| Gross vehicle weight | 32,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Raaf RO 25 weigh?
The unladen weight is 6,482 kg.
What is the gross vehicle weight of the Raaf RO 25?
32,000 kg.
Up to what speed is the Raaf RO 25 approved?
Approved up to 100 km/h.
When was the Raaf RO 25 built?
Production years: 1977.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.