Ppm 2FE1P2
Built: 2005 · Series: Other models
More machines from model year 2005
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
PPM – other models: the collection page for the French truck-mounted cranes, AC and TC ranges, six- to eight-cylinder diesels, gross weights up to 60 tonnes
This page gathers vehicles from PPM (Potain-Poclain Manutention), a French manufacturer of mobile cranes built on purpose-designed multi-axle chassis, which is why the register lists them among the trucks. The AC designation (All Terrain Crane) marks off-road cranes on their own chassis, TC (Truck Crane) cranes on a reinforced truck chassis; the following number gives the lifting-capacity class in tonnes, and the "/2L" or "/3L" suffix the number of axles. PPM was absorbed into the US group Terex in the 1990s as the European crane industry consolidated.
Read on 3 more paragraphs
The register lists 17 versions here with 5,958 to 11,946 cm³ displacement from six- to eight-cylinder engines, weights of 15,600 to 59,900 kg, gross vehicle weights of 17,100 to 60,000 kg, lengths of 10,500 to 14,760 mm and widths of 2,480 to 2,800 mm.
As a specialist crane builder, PPM served the market for mobile lifting equipment in construction and industry, competing with Grove, Liebherr and Faun; the vehicles on this page span the range from more compact truck cranes to heavy multi-axle all-terrain cranes.
On these specialised vehicles, check the condition of the boom and hydraulic cylinders including seals, the structure of the outriggers and chassis, the engine and drivetrain condition given the high operating weight, the function of the load-moment limiter, and — because of the low production numbers — the availability of load charts and maintenance documentation.
Sources: SpecCodex register, model data: PPM (weitere Modelle)
Technical data
Engine
| Cylinders | 6correct |
|---|---|
| Displacement | 6,374 cm³correct |
Dimensions and weights
| Length | 10,500 mmcorrect |
|---|---|
| Width | 2,560 mmcorrect |
| Wheelbase | 3,550 mmcorrect |
| Unladen weight | 23,825 kgcorrect |
| Gross vehicle weight | 24,000 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Ppm 2FE1P2 weigh?
The unladen weight is 23,825 kg.
What is the gross vehicle weight of the Ppm 2FE1P2?
24,000 kg.
What engine does the Ppm 2FE1P2 have?
6 cylinders, 6,374 cm³ displacement.
What are the dimensions of the Ppm 2FE1P2?
10,500 mm × 2,560 mm.
When was the Ppm 2FE1P2 built?
Production years: 2005.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
14.07C
2FDTM2/ATT400
2FE1 P2
340 ATT
380 ATT
380ATT
400 ATT
5 MAVM 3
AC 40/2L
AC60/3L
ATT 600
TC 40 L
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
