StartTrucks over 7.5 tZil › KAMAZ-6580

Zil KAMAZ-6580

Built: 2016-2024 · Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Зил KAMAZ-6580 is a machine built by Зил. Production: 2016-2024. The machine is 7,245 mm long, 2,550 mm wide and 3,460 mm high. The unladen weight is 15,250 kg. Unladen weight across the Зил range ranges from 32.3 to 199,170 kg; the KAMAZ-6580 sits at the bottom of that range with 15,250 kg. Its immediate neighbours are the Т-140 below it with 15,100 kg and the Т-170 above it with 16,000 kg. 161 Зил models across 8 series are on record. The model is listed under Trucks over 7.5 t. 5 verified figures from 1 source are on file.

Technical data

Engine

EngineMercedes-Benz OM 457LAcorrect

Dimensions and weights

Length7,245correct
Width2,550correct
Height3,460correct
Unladen weight15,250correct

Frequently asked questions

How much does the Zil KAMAZ-6580 weigh?

The unladen weight is 15,250 kg.

What are the dimensions of the Zil KAMAZ-6580?

7,245 mm × 2,550 mm × 3,460 mm.

When was the Zil KAMAZ-6580 built?

Production years: 2016-2024.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare