StartTrucks over 7.5 tZil › КАМАЗ-65115

Zil КАМАЗ-65115

Built: 1999-1999 · Series: Other models

The photo shows the КАМАЗ-5320 from the same series. Wikimedia Commons · CC BY-SA 3.0 · SuperTank17 · Dateiseite

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Зил КАМАЗ-65115 is a machine built by Зил. Production: 1999. The machine is 2,500 mm wide. The unladen weight is 10,500 kg. Unladen weight across the Зил range ranges from 32.3 to 199,170 kg; the КАМАЗ-65115 sits at the bottom of that range with 10,500 kg. Its immediate neighbours are the КАМАЗ-4911 below it with 10,300 kg and the КАМАЗ-6350 above it with 10,750 kg. 161 Зил models across 8 series are on record. The model is listed under Trucks over 7.5 t. 4 verified figures from 1 source are on file.

Technical data

Engine

EngineКАМАЗ-740.705-300 (Euro-5)correct

Dimensions and weights

Width2,500correct
Unladen weight10,500correct

Drivetrain and chassis

Drivefour-wheel drivecorrect

Frequently asked questions

How much does the Zil КАМАЗ-65115 weigh?

The unladen weight is 10,500 kg.

When was the Zil КАМАЗ-65115 built?

Production years: 1999.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 4 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare