StartBuses & coachesZil › МАЗ-281

Zil МАЗ-281

Built: 2019-2019 · Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The МАЗ-281 comes from Зил. Production: 2019. The machine is 6,000 mm long, 2,100 mm wide and 2,800 mm high. The unladen weight is 2,940 kg. The wheelbase measures 3,570 mm. Unladen weight across the Зил range ranges from 32.3 to 199,170 kg; the МАЗ-281 sits at the bottom of that range with 2,940 kg. Its immediate neighbours are the АМО-3 below it with 2,840 kg and the ЗИС-15 above it with 3,300 kg. 161 Зил models across 8 series are on record. The model is listed under Buses & coaches. 6 verified figures from 1 source are on file.

Technical data

Engine

EngineJAC HFC4DE1-1D Euro-5correct

Dimensions and weights

Length6,000correct
Width2,100correct
Height2,800correct
Wheelbase3,570correct
Unladen weight2,940correct

Frequently asked questions

How much does the Zil МАЗ-281 weigh?

The unladen weight is 2,940 kg.

What are the dimensions of the Zil МАЗ-281?

6,000 mm × 2,100 mm × 2,800 mm.

When was the Zil МАЗ-281 built?

Production years: 2019.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Bus in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare