StartTrucks over 7.5 tZil › ВАЗ-2702

Zil ВАЗ-2702

Built: 1983-1988 · Series: Other models

The photo shows the KAMAZ-6580 from the same series. Source: https://commons.wikimedia.org/wiki/Category:KamAZ-65802

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The ВАЗ-2702 comes from Зил. Production: 1983-1988. The machine is 3,300 mm long, 1,600 mm wide and 1,850 mm high. 161 Зил models across 8 series are on record. The model is listed under Trucks over 7.5 t. 4 verified figures from 1 source are on file.

Technical data

Engine

EngineElektromotor ПТ-125, 25 kW (34 PS)correct

Dimensions and weights

Length3,300correct
Width1,600correct
Height1,850correct

Frequently asked questions

What are the dimensions of the Zil ВАЗ-2702?

3,300 mm × 1,600 mm × 1,850 mm.

When was the Zil ВАЗ-2702 built?

Production years: 1983-1988.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 4 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare