Plandex PTL-1800
Built: 2016-2021 · Series: Other models
More machines from model year 2016
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Plandex PTL-1800: an EU class O4 trailer with a gross vehicle weight of 19,000 kg, an unladen weight of 5,200 kg, a length of 10,200 mm and a 7,800 mm wheelbase, registered 2016 to 2021
With a gross vehicle weight of 19,000 kg, the Plandex PTL-1800 counts among the heavy trailers of EU class O4, above 10 tonnes. This class covers the upper end of road freight, from low-loaders for machinery transport to tippers and flatbed semi-trailers for bulk and building materials.
Read on 3 more paragraphs
Registered between 2016 and 2021, the PTL-1800 has an unladen weight of 5,200 kg and, at a gross vehicle weight of 19,000 kg, reaches a payload of 13,800 kg. At 10,200 mm long, 2,550 mm wide, with a 7,800 mm wheelbase and eight wheels, it is built for a high ratio of payload to its own weight, as needed for curtain-sided or box bodies carrying light, bulky goods. Such a configuration suits curtain-sided or box bodies moving light, bulky freight across longer distances.
Because EU rules no longer permit an overrun brake above 10 tonnes of gross vehicle weight, a trailer of this class runs with an air brake system. The combination of towing vehicle and trailer must be matched to their combined train weight, driven with a category CE licence.
Before buying a trailer this old, check the frame for through-corrosion, above all at the axle mountings and tow coupling. The brake system and tyres age independently of mileage; standing damage and rubber age matter more here than tread. Lighting and the underrun guard must be complete, or the test centre will refuse the certificate.
Sources: SpecCodex-Register: Kennwerte des Modells PTL-1800
Technical data
Dimensions and weights
| Length | 10,200 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 7,800 mmcorrect |
| Unladen weight | 5,200 kgcorrect |
| Gross vehicle weight | 19,000 kgcorrect |
Drivetrain and chassis
| Wheels | 8correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Plandex PTL-1800 weigh?
The unladen weight is 5,200 kg.
What is the gross vehicle weight of the Plandex PTL-1800?
19,000 kg.
Up to what speed is the Plandex PTL-1800 approved?
Approved up to 100 km/h.
What are the dimensions of the Plandex PTL-1800?
10,200 mm × 2,550 mm.
When was the Plandex PTL-1800 built?
Production years: 2016-2021.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
