Pijnappel PTA-3500.
Built: 2000-2008 · Series: Other models
More machines from model year 2000
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Pijnappel – other models: the collective page of a Dutch trailer and chassis builder with PAT, PDS, JG and MG ranges, 260 to 3,430 kg unladen weight, up to 3,500 kg gross weight
This page gathers the Pijnappel trailers the register could not assign to a named range. Pijnappel is a Dutch maker of trailer chassis; the type codes in the model line-up – PAT, PDS, JG, MG, BUR, FG, HG and LG among many others – point to a broad modular system of base frames onto which different bodies are fitted according to use, from simple open platforms to carriers for equipment and small machinery. A consistent scheme behind the letter and number combinations cannot be reliably reconstructed from the model names alone.
Read on 3 more paragraphs
The register lists here 141 versions with unladen weights from 260 to 3,430 kg and gross weights from 800 to 3,500 kg. Lengths range from 3,230 to 7,640 mm, widths from 1,160 to 2,550 mm.
With gross weights mostly within the EU trailer class up to 3.5 t, Pijnappel is one of the smaller, regionally active Dutch trailer builders that supply special builds for trades, agriculture and commerce alongside standard ware, and whose vehicles turn up in German-speaking markets chiefly on the used market.
When buying used, what counts on Pijnappel trailers is the condition of frame and welds, axles, brakes and the overrun coupling, the state of the lighting system and, depending on the body, floor and side boards; since the brand is little known outside the Netherlands, it is worth checking chassis number against registration papers before buying, as spare parts are often only available directly from the manufacturer or independent trailer workshops.
Sources: SpecCodex register, model data: Pijnappel, Zulassungsdaten RDW (Niederlande)
Technical data
Dimensions and weights
| Width | 2,550 mmcorrect |
|---|---|
| Wheelbase | 960 mmcorrect |
| Unladen weight | 1,800 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Pijnappel PTA-3500. weigh?
The unladen weight is 1,800 kg.
What is the gross vehicle weight of the Pijnappel PTA-3500.?
3,500 kg.
Up to what speed is the Pijnappel PTA-3500. approved?
Approved up to 100 km/h.
When was the Pijnappel PTA-3500. built?
Production years: 2000-2008.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
PAT-3500-TRI
PDR 3500
PDS-3500-D
PDS-3501
PDS/3500
PDSZ-3500
PTA-3500 L.
PTA-3500-3
PTA-3500-3A
PTK -3500-1
PTK 3500
PTK 3500-2
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
