Pfau REXTER A6500
Built: 2007-2008 · Series: Other models
More machines from model year 2007
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Pfau Rexter A6500: chassis of vehicle class N2 with a four-cylinder diesel engine of nearly 3 litres, serving as a base for bodywork in regional distribution transport
Vehicles in this weight class, between 3.5 and 12 tonnes gross vehicle weight, belong to vehicle class N2 and usually serve as a base for box bodies, flatbeds or special-purpose bodies in regional distribution transport. Such chassis are often fitted with the matching body by smaller, specialised bodybuilders operating on a regional scale.
Read on 3 more paragraphs
The four-cylinder diesel engine of 2,977 cm³ drives a vehicle 6,570 mm long and 1,910 mm wide on four wheels. With a kerb weight of 4,080 kg and a gross vehicle weight of 6,990 kg, the payload comes to about 2,910 kg, carried on a wheelbase of 3,760 mm suited to a compact body rather than a long one.
With a gross vehicle weight of nearly 7 tonnes, the vehicle falls into class N2 and requires a category C1 driving licence. The recorded top speed of 90 km/h matches the general speed limit that applies to trucks of this weight class across the European Union.
When buying a chassis with a body in this weight class, the condition of the body matters as much as that of the chassis: tightness of box bodies, condition of the tail lift if fitted, and corrosion on the frame and axles. The actual payload is worth recalculating from kerb weight and gross vehicle weight, since additional body fittings quickly eat into the available margin on a chassis this size.
Sources: SpecCodex-Register: Kennwerte des Modells REXTER A6500
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 2,977 cm³correct |
Dimensions and weights
| Length | 6,570 mmcorrect |
|---|---|
| Width | 1,910 mmcorrect |
| Wheelbase | 3,760 mmcorrect |
| Unladen weight | 4,080 kgcorrect |
| Gross vehicle weight | 6,990 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 90 km/hcorrect |
Frequently asked questions
How much does the Pfau REXTER A6500 weigh?
The unladen weight is 4,080 kg.
What is the gross vehicle weight of the Pfau REXTER A6500?
6,990 kg.
What engine does the Pfau REXTER A6500 have?
4 cylinders, 2,977 cm³ displacement.
How fast does the Pfau REXTER A6500 go?
Top speed is 90 km/h.
What are the dimensions of the Pfau REXTER A6500?
6,570 mm × 1,910 mm.
When was the Pfau REXTER A6500 built?
Production years: 2007-2008.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: [1]
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.