Peugeot/recapol BOXER RECAPOL
Built: 2022 · Series: Other models
More machines from model year 2022
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Peugeot Boxer Recapol (2022): six-metre box conversion on a Boxer chassis with 2.2-litre four-cylinder diesel, 3,500 kg gross weight and 160 km/h top speed
The Peugeot Boxer is part of the joint Sevel development by PSA and Fiat, built in Val di Sangro and technically related to the Fiat Ducato and Citroën Jumper. This Boxer carries the Recapol designation, meaning a chassis fitted with a body from a bodybuilder that goes beyond the manufacturer's standard panel-van range.
Read on 3 more paragraphs
The four-cylinder diesel with 2,179 cc displacement is the larger of the two Boxer engine options. At 3,500 kg gross vehicle weight and 2,457 kg kerb weight, the payload comes to just over 1,040 kg. At 6,000 mm overall length and 4,040 mm wheelbase, the vehicle belongs to the long body version, while the 2,050 mm width matches the standard cab width without sideways overhang. Top speed is given as 160 km/h.
At 3,500 kg gross vehicle weight the Boxer remains in EU category N1 and can be driven on a category B licence. At six metres overall length it counts among the long versions of its class, something to bear in mind on narrow inner-city streets and low car-park entrances.
When buying used, the connection points between body and chassis deserve particular attention, since long bodies can develop torsion cracks over time. The 2.2-litre HDi engine should be checked for clean exhaust readings and a functioning particulate filter. At the rear axle it is worth examining the suspension, since long bodies under full load put more strain on the leaf springs than short panel vans.
Sources: SpecCodex-Register: Kennwerte des Modells BOXER RECAPOL
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 2,179 cm³correct |
Dimensions and weights
| Length | 6,000 mmcorrect |
|---|---|
| Width | 2,050 mmcorrect |
| Wheelbase | 4,040 mmcorrect |
| Unladen weight | 2,457 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 160 km/hcorrect |
Frequently asked questions
How much does the Peugeot/recapol BOXER RECAPOL weigh?
The unladen weight is 2,457 kg.
What is the gross vehicle weight of the Peugeot/recapol BOXER RECAPOL?
3,500 kg.
What engine does the Peugeot/recapol BOXER RECAPOL have?
4 cylinders, 2,179 cm³ displacement.
What are the dimensions of the Peugeot/recapol BOXER RECAPOL?
6,000 mm × 2,050 mm.
When was the Peugeot/recapol BOXER RECAPOL built?
Production years: 2022.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
