Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Peugeot › Vans up to 3.5 t (Class N1) › TORPEDO COMMERCIALE

Peugeot TORPEDO COMMERCIALE

Built: 1930 · Series: Vans up to 3.5 t (Class N1)

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the TORPEDO COMMERCIALE, Peugeot offers a model from the Vans up to 3.5 t (Class N1) series. Production: 1930. The engine has 4 cylinders, with a displacement of 1,122 cm³. The vehicle is 3,520 mm long and 1,420 mm wide. The unladen weight is 865 kg. The wheelbase measures 2,430 mm. The gross vehicle weight is 1,806 kg. The vehicle runs on 4 wheels. The Vans up to 3.5 t (Class N1) series covers 990 models. Unladen weight within it ranges from 500 to 3,360 kg; the TORPEDO COMMERCIALE sits at the bottom of that range with 865 kg. Its immediate neighbours are the 177B below it with 864 kg and the 205 XAD 1.8 MULTI above it with 870 kg. Gross vehicle weight within it ranges from 824 to 3,500 kg; here the TORPEDO COMMERCIALE sits in the lower part of that range with 1,806 kg. 1709 Peugeot models across 26 series are on record.

Peugeot vans and utility versions up to 3.5 t (class N1) – collective page for the EU light-van class: from the 203/205 commercial versions of the 1950s to Boxer, Expert and Partner, engines from 34 to 121 kW

The EU vehicle class N1 covers light commercial vehicles up to 3.5 t gross vehicle weight; this page is a collective page built from registration data (Netherlands, Finland) bundling every Peugeot range recorded in that class. Peugeot, founded in 1810 as a family business and building cars since 1889, is among the longest-established European van makers, part of PSA since the Citroën merger (1976) and of Stellantis since 2021. The register holds early commercial versions of the 203 and 205 saloon ranges (COMMERCIAL trims with an estate-style rear) alongside the actual van ranges, which by manufacturer logic fall into J7/J9 (forward-control vans until 1991), Boxer (since 1994, jointly developed with the Fiat Ducato and Citroën Jumper), Expert (since 1995, with the Fiat Scudo/Citroën Jumpy) and Partner (since 1996) – the newer ranges are grouped here by manufacturer logic.

Read on 3 more paragraphs

The register lists 990 versions, with recorded outputs of 34 to 121 kW, displacements of 695 to 2,999 cm³ across 4 to 6 cylinders, kerb weights of 500 to 3,360 kg and gross vehicle weights of 824 to 3,500 kg; width ranges from 1,280 to 2,440 mm, length from 3,520 to 7,400 mm.

As a class, N1 covers everything at Peugeot from a small estate car with a commercial registration to a large-volume panel van used below 3.5 t for trade purposes – direct competitors are the sister models from Citroën/Fiat as well as Renault, VW and Ford.

On a used example, what matters on the older ranges is corrosion around the wheel arches and load floor, on the newer common-rail diesels the turbocharger, EGR valve and particulate filter, plus the condition of the sliding door runners and the payload on the registration document against the gross vehicle weight. Parts are generally well supplied through the dense Stellantis dealer network.

Sources: SpecCodex register, model data: Peugeot Transporter bis 3,5 t (Klasse N1), Peugeot (Stellantis, Hersteller)

Technical data

Engine

Cylinders4correct
Displacement1,122 cm³correct

Dimensions and weights

Length3,520 mmcorrect
Width1,420 mmcorrect
Wheelbase2,430 mmcorrect
Unladen weight865 kgcorrect
Gross vehicle weight1,806 kgcorrect

Drivetrain and chassis

Wheels4correct

Frequently asked questions

How much does the Peugeot TORPEDO COMMERCIALE weigh?

The unladen weight is 865 kg.

What is the gross vehicle weight of the Peugeot TORPEDO COMMERCIALE?

1,806 kg.

What engine does the Peugeot TORPEDO COMMERCIALE have?

4 cylinders, 1,122 cm³ displacement.

What are the dimensions of the Peugeot TORPEDO COMMERCIALE?

3,520 mm × 1,420 mm.

When was the Peugeot TORPEDO COMMERCIALE built?

Production years: 1930.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare