Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Peugeot › Partner › Partner 2510

Peugeot Partner 2510

Built: 2022-2026 · Series: Partner

More machines from model year 2022

Source: ebay.com.hk

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the Partner 2510, Peugeot offers a model from the Partner series. Production: 2022-2026. The engine delivers 75 kW, has 4 cylinders, with a displacement of 1,499 cm³. The vehicle is 4,753 mm long and 1,848 mm wide. The unladen weight is 1,516 kg. The gross vehicle weight is 2,510 kg. The gearbox offers 6 gears. The Partner series covers 97 models. Rated output within it ranges from 50 to 96 kW; the Partner 2510 sits in the middle of that range with 75 kW. Its immediate neighbours are the Partner tepee below it with 68 kW and the 4D PARTNER BREAK 1.6I-5FNFUF/269 above it with 80 kW. Unladen weight within it ranges from 1,180 to 1,720 kg; here the Partner 2510 sits in the upper part of that range with 1,516 kg. 1709 Peugeot models across 26 series are on record.

Peugeot Partner – the compact van from Vigo: three generations since 1996 as sister model to the Citroën Berlingo, 1.1 to 2.0-litre HDi diesels, 50 to 96 kW, kerb weights from 955 to 1,720 kg

The Peugeot Partner arrived in 1996 as a sister model to the Citroën Berlingo and has since been built at the PSA plant in Vigo, Spain. The model plates in the register reflect several generations: the three-digit types such as 170C and 190C denote the wheelbase and payload variant of the first generation, L1/L2 the short and long wheelbase of the second and third, HDi and HDIF the diesel injection with or without particulate filter, with the power rating in kW following in the type designation.

Read on 3 more paragraphs

The register lists 97 versions here with engines from 50 to 96 kW from 1,124 to 1,998 cm³ displacement, kerb weights from 955 to 1,720 kg and gross weights from 1,548 to 2,510 kg; lengths range from 4,110 to 4,753 mm.

The Partner is one of Europe's best-selling compact vans and, as a panel van, estate and the Tepee/Rifter passenger version, covers the whole spectrum from a tradesman's vehicle to a family car, with body variants for refrigerated transport, flatbed and disability conversions.

On HDi engines, what counts is the turbocharger, injectors and, on newer models, the particulate filter; on panel vans, rust on the sliding door tracks, load floor and rear doors, and the condition of the clutch and suspension bushes; spare parts are readily available through the PSA network and independent workshops, including for the older first-generation models.

Sources: SpecCodex register, model data: Peugeot Partner, Peugeot (manufacturer)

Technical data

Engine

Power75 kWcorrect
Cylinders4correct
Displacement1,499 cm³correct

Dimensions and weights

Length4,753 mmcorrect
Width1,848 mmcorrect
Unladen weight1,516 kgcorrect
Gross vehicle weight2,510 kgcorrect

Drivetrain and chassis

Gears6correct

Where this model stands

Power-to-weight ratio: 49.5 kW/t (75 kW / 1.5 t)

Stronger than 35% of the vans in the register — out of 7,144 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Peugeot Partner 2510 have?

The Peugeot Partner 2510 delivers 75 kW.

How much does the Peugeot Partner 2510 weigh?

The unladen weight is 1,516 kg.

What is the gross vehicle weight of the Peugeot Partner 2510?

2,510 kg.

What engine does the Peugeot Partner 2510 have?

4 cylinders, 1,499 cm³ displacement.

What are the dimensions of the Peugeot Partner 2510?

4,753 mm × 1,848 mm.

When was the Peugeot Partner 2510 built?

Production years: 2022-2026.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare