Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Peugeot › CT

Peugeot CT

Built: 2001 · Series: Vans up to 3.5 t (Class N1)

More machines from model year 2001

The photo shows the Q3A from the same series. Source: https://commons.wikimedia.org/w/index.php?curid=50668519
The CT from Peugeot is part of the Vans up to 3.5 t (Class N1) series. Production: 2001. The engine has 4 cylinders, with a displacement of 2,800 cm³. The machine is 2,020 mm wide. The unladen weight is 2,560 kg. The wheelbase measures 4,050 mm. The gross vehicle weight is 3,500 kg. The machine runs on 4 wheels. The Vans up to 3.5 t (Class N1) series covers 990 models. Unladen weight within it ranges from 500 to 3,360 kg; the CT sits in the upper part of that range with 2,560 kg. Its immediate neighbours are the BOXER 435 L3 CITYBOX LK 2.2 HDI 120 below it with 2,558 kg and the J7PY60 above it with 2,570 kg. Gross vehicle weight within it ranges from 824 to 3,500 kg; here the CT sits at the top of that range with 3,500 kg. 1709 Peugeot models across 26 series are on record.

Peugeot vans and utility versions up to 3.5 t (class N1) – collective page for the EU light-van class: from the 203/205 commercial versions of the 1950s to Boxer, Expert and Partner, engines from 34 to 121 kW

The EU vehicle class N1 covers light commercial vehicles up to 3.5 t gross vehicle weight; this page is a collective page built from registration data (Netherlands, Finland) bundling every Peugeot range recorded in that class. Peugeot, founded in 1810 as a family business and building cars since 1889, is among the longest-established European van makers, part of PSA since the Citroën merger (1976) and of Stellantis since 2021. The register holds early commercial versions of the 203 and 205 saloon ranges (COMMERCIAL trims with an estate-style rear) alongside the actual van ranges, which by manufacturer logic fall into J7/J9 (forward-control vans until 1991), Boxer (since 1994, jointly developed with the Fiat Ducato and Citroën Jumper), Expert (since 1995, with the Fiat Scudo/Citroën Jumpy) and Partner (since 1996) – the newer ranges are grouped here by manufacturer logic.

Read on 3 more paragraphs

The register lists 990 versions, with recorded outputs of 34 to 121 kW, displacements of 695 to 2,999 cm³ across 4 to 6 cylinders, kerb weights of 500 to 3,360 kg and gross vehicle weights of 824 to 3,500 kg; width ranges from 1,280 to 2,440 mm, length from 3,520 to 7,400 mm.

As a class, N1 covers everything at Peugeot from a small estate car with a commercial registration to a large-volume panel van used below 3.5 t for trade purposes – direct competitors are the sister models from Citroën/Fiat as well as Renault, VW and Ford.

On a used example, what matters on the older ranges is corrosion around the wheel arches and load floor, on the newer common-rail diesels the turbocharger, EGR valve and particulate filter, plus the condition of the sliding door runners and the payload on the registration document against the gross vehicle weight. Parts are generally well supplied through the dense Stellantis dealer network.

Sources: SpecCodex register, model data: Peugeot Transporter bis 3,5 t (Klasse N1), Peugeot (Stellantis, Hersteller)

Technical data

Engine

Cylinders4correct
Displacement2,800 cm³correct

Dimensions and weights

Width2,020 mmcorrect
Wheelbase4,050 mmcorrect
Unladen weight2,560 kgcorrect
Gross vehicle weight3,500 kgcorrect

Drivetrain and chassis

Wheels4correct

Frequently asked questions

How much does the Peugeot CT weigh?

The unladen weight is 2,560 kg.

What is the gross vehicle weight of the Peugeot CT?

3,500 kg.

What engine does the Peugeot CT have?

4 cylinders, 2,800 cm³ displacement.

When was the Peugeot CT built?

Production years: 2001.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare