Peugeot 190C 1.6HDI-66KW
Built: 2006-2008 · Series: Partner
More machines from model year 2006
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Peugeot Partner – the compact van from Vigo: three generations since 1996 as sister model to the Citroën Berlingo, 1.1 to 2.0-litre HDi diesels, 50 to 96 kW, kerb weights from 955 to 1,720 kg
The Peugeot Partner arrived in 1996 as a sister model to the Citroën Berlingo and has since been built at the PSA plant in Vigo, Spain. The model plates in the register reflect several generations: the three-digit types such as 170C and 190C denote the wheelbase and payload variant of the first generation, L1/L2 the short and long wheelbase of the second and third, HDi and HDIF the diesel injection with or without particulate filter, with the power rating in kW following in the type designation.
Read on 3 more paragraphs
The register lists 97 versions here with engines from 50 to 96 kW from 1,124 to 1,998 cm³ displacement, kerb weights from 955 to 1,720 kg and gross weights from 1,548 to 2,510 kg; lengths range from 4,110 to 4,753 mm.
The Partner is one of Europe's best-selling compact vans and, as a panel van, estate and the Tepee/Rifter passenger version, covers the whole spectrum from a tradesman's vehicle to a family car, with body variants for refrigerated transport, flatbed and disability conversions.
On HDi engines, what counts is the turbocharger, injectors and, on newer models, the particulate filter; on panel vans, rust on the sliding door tracks, load floor and rear doors, and the condition of the clutch and suspension bushes; spare parts are readily available through the PSA network and independent workshops, including for the older first-generation models.
Sources: SpecCodex register, model data: Peugeot Partner, Peugeot (manufacturer)
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 1,560 cm³correct |
Dimensions and weights
| Width | 1,720 mmcorrect |
|---|---|
| Wheelbase | 2,690 mmcorrect |
| Unladen weight | 1,194 kgcorrect |
| Gross vehicle weight | 1,930 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Peugeot 190C 1.6HDI-66KW weigh?
The unladen weight is 1,194 kg.
What is the gross vehicle weight of the Peugeot 190C 1.6HDI-66KW?
1,930 kg.
What engine does the Peugeot 190C 1.6HDI-66KW have?
4 cylinders, 1,560 cm³ displacement.
When was the Peugeot 190C 1.6HDI-66KW built?
Production years: 2006-2008.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
1.4I 600
1.6HDI-GB9HWC/269
1.6I VTI
1.6VTI
120 L1 1.6 16V-2PL
120 L1 1.6 HDI 55KW-2PL
120 L1 1.6 HDI 55KW-3PL
120 L1 1.6 HDI 66KW-2PL
120 L1 1.6 HDI 66KW-3PL
120 L1 1.6HDIF 66KW - 2PL
120 L1 1.6HDIF 66KW - 3PL
122 L1 1.6 HDI 55KW-2PL
Sources: [1]
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
