Technical register for agricultural, construction and commercial machinery · sourced data

Perkins Engines 403F-E17T

Built: 2020-2024 · Series: Other models

More machines from model year 2020

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 403F-E17T comes from Perkins Engines. Production: 2020-2024. The fuel is 7-15 ppm Ultra Low Sulfur Diesel. The rated output is 30 kW. The engine is turbocharged. The engine meets emissions stage Tier 4 (Final or Phase In). Fuel reaches the combustion chamber through direct injection. Charging is by a wastegate turbocharger. It is a four-stroke diesel engine. The cylinders are arranged in line. Rated output across the Perkins Engines range ranges from 4 to 678 kW; the 403F-E17T sits at the bottom of that range with 30 kW. Its immediate neighbours are the 403D-15T(C1.5) below it with 29 kW and the 404D-22T(C2.2) above it with 33 kW. 352 Perkins Engines models are on record.

Perkins Engines – other nonroad diesel engines: the collective page of the 1100 to 2500 ranges outside the named models, from Peterborough, 4 to 678 kW, dual Caterpillar designation C4.4 to C15

Perkins, headquartered in Peterborough, England, founded in 1932 and wholly part of Caterpillar since 1998, is one of the largest independent diesel-engine makers for construction, agricultural and industrial machinery. This page gathers the engines the register could not assign to a named range, from the 1100 series (1104, 1106) through the 1200 series (1204, 1206) to the 2200 and 2500 ranges; the parallel Caterpillar designations in brackets – C4.4, C6.6, C7.1 – give the displacement in litres and show that Perkins engines have been marketed under both brand names since the Caterpillar takeover.

Read on 3 more paragraphs

The register lists here 352 versions with 4 to 678 kW rated output at 1,500 to 2,800 rpm, from two- to six-cylinders with 67 to 145 mm bore and 72 to 183 mm stroke, torques from 19.1 to 5,500 Nm. The Tier 3 emission stage dominates with 214 versions ahead of Tier 4 (Final or Phase-in) with 72 and Interim Tier 4 with 66; the 75 to 130 kW power category is the most common with 128 versions.

Perkins engines drive construction machinery, telehandlers, compressors, generator sets and mid-size farm machinery; as a Caterpillar subsidiary the brand supplies both the group's own construction machinery and numerous outside manufacturers without their own engine production in this power segment.

On a used purchase, operating hours count, the condition of the turbocharger (predominantly waste-gate design), the injection pump or, on newer model years, the common-rail injectors, the cooling system and charge-air cooler, and on Tier 4 engines the exhaust aftertreatment; since Perkins parts run through both the Perkins and the Caterpillar network, it is worth checking both part numbers.

Sources: SpecCodex register, model data: Perkins Engines (weitere Nonroad-Dieselmotoren), Perkins Engines (Caterpillar, Hersteller)

Technical data

Engine

Engine code6748/2600correct
Engine familyLPKXL2.22TD7correct
Fuel7-15 ppm Ultra Low Sulfur Dieselcorrect
Rated output30 kWcorrect
Power band19<=kW<37correct
Rated speed2,600 rpmcorrect
Maximum torque116 N·mcorrect
Speed at max. torque1,600 rpmcorrect
Cylinders3correct
Cylinder layoutin linecorrect
Bore84 mmcorrect
Stroke100 mmcorrect
Operating cyclefour-stroke dieselcorrect
Injectiondirect injectioncorrect
Aspirationturbochargedcorrect
Turbocharger typewastegate turbochargercorrect
Emissions stageTier 4 (Final or Phase In)correct

Origin and approval

Version6748/2600correct
Sales regionbothcorrect

Frequently asked questions

How much power does the Perkins Engines 403F-E17T have?

The Perkins Engines 403F-E17T delivers 30 kW.

When was the Perkins Engines 403F-E17T built?

Production years: 2020-2024.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 20 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Diesel engine in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare