Technical register for agricultural, construction and commercial machinery · sourced data

Perkins Engines 2806C-E18TAG3

Built: 2012-2013 · Series: Other models

More machines from model year 2012

The photo shows the 404F-E22T(C2.2) from the same series. Source: https://www.lectura-specs.com/en/model/components/engines-pe

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Perkins Engines 2806C-E18TAG3 is a machine built by Perkins Engines. Production: 2012-2013. The rated output is 678 kW. The engine is turbocharged. The engine meets emissions stage Tier 3. The charge air is air-cooled. Charging is by a fixed-geometry turbocharger. It is a four-stroke diesel engine. The cylinders are arranged in line. Rated output across the Perkins Engines range ranges from 4 to 678 kW; the 2806C-E18TAG3 sits at the top of that range with 678 kW. Its immediate neighbours are the 2506C-E15TAG4 below it with 623 kW. 352 Perkins Engines models are on record.

Perkins Engines – other nonroad diesel engines: the collective page of the 1100 to 2500 ranges outside the named models, from Peterborough, 4 to 678 kW, dual Caterpillar designation C4.4 to C15

Perkins, headquartered in Peterborough, England, founded in 1932 and wholly part of Caterpillar since 1998, is one of the largest independent diesel-engine makers for construction, agricultural and industrial machinery. This page gathers the engines the register could not assign to a named range, from the 1100 series (1104, 1106) through the 1200 series (1204, 1206) to the 2200 and 2500 ranges; the parallel Caterpillar designations in brackets – C4.4, C6.6, C7.1 – give the displacement in litres and show that Perkins engines have been marketed under both brand names since the Caterpillar takeover.

Read on 3 more paragraphs

The register lists here 352 versions with 4 to 678 kW rated output at 1,500 to 2,800 rpm, from two- to six-cylinders with 67 to 145 mm bore and 72 to 183 mm stroke, torques from 19.1 to 5,500 Nm. The Tier 3 emission stage dominates with 214 versions ahead of Tier 4 (Final or Phase-in) with 72 and Interim Tier 4 with 66; the 75 to 130 kW power category is the most common with 128 versions.

Perkins engines drive construction machinery, telehandlers, compressors, generator sets and mid-size farm machinery; as a Caterpillar subsidiary the brand supplies both the group's own construction machinery and numerous outside manufacturers without their own engine production in this power segment.

On a used purchase, operating hours count, the condition of the turbocharger (predominantly waste-gate design), the injection pump or, on newer model years, the common-rail injectors, the cooling system and charge-air cooler, and on Tier 4 engines the exhaust aftertreatment; since Perkins parts run through both the Perkins and the Caterpillar network, it is worth checking both part numbers.

Sources: SpecCodex register, model data: Perkins Engines (weitere Nonroad-Dieselmotoren), Perkins Engines (Caterpillar, Hersteller)

Technical data

Engine

Engine code1correct
Engine familyDPKXL18.1TAGcorrect
Fuel300-500 ppm Low Sulfur Diesel; Perkins specification for distilate diesel fuelcorrect
Rated output678 kWcorrect
Power band560<kW<=2237correct
Rated speed1,800 rpmcorrect
Maximum torque3,598 N·mcorrect
Speed at max. torque1,800 rpmcorrect
Cylinders6correct
Cylinder layoutin linecorrect
Bore145 mmcorrect
Stroke183 mmcorrect
Operating cyclefour-stroke dieselcorrect
Injectiondirect injectioncorrect
Aspirationturbochargedcorrect
Turbocharger typeFixed Turbochargercorrect
Charge-air coolingaircorrect
Emissions stageTier 3correct

Origin and approval

Version1correct
Sales regionUSA excluding Californiacorrect

Frequently asked questions

How much power does the Perkins Engines 2806C-E18TAG3 have?

The Perkins Engines 2806C-E18TAG3 delivers 678 kW.

When was the Perkins Engines 2806C-E18TAG3 built?

Production years: 2012-2013.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: US EPA — engine certification data (retrieved August 2026) · How we check the data

Diesel engine in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare