Start › Excavators & compaction › Pel-Job › EB706

Pel-Job EB706

Series: Pel-Job Midi Excavator

Source: https://commons.wikimedia.org/w/index.php?curid=28147914

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Pel-Job Midi Excavator series from Pel-Job includes the EB706. The engine delivers 56.8 hp (41.8 kW), has 4 cylinders, with a displacement of 3,331.5 cm³. Torque is 204.1 Nm. Rated speed is 2,200 rpm. The unladen weight is 7,450 kg. Ground clearance is 362.7 mm. The tank holds 110.2 litres. Maximum torque is reached at 1,550 rpm. The pump delivers 160.1 l/min. The hydraulic tank holds 131.4 litres. Working pressure is 260 bar. The electrical system runs on 12 V. The engine fitted is the S4S. The Pel-Job Midi Excavator series covers 3 models. Rated output within it ranges from 37.3 to 56.8 hp; the EB706 sits at the top of that range with 56.8 hp. Its immediate neighbours are the EB506EX below it with 37.3 hp. 21 Pel-Job models across 2 series are on record. The model is listed under Excavators & compaction. 16 verified figures from 1 source are on file.

Technical data

Engine

Engine model	S4Scorrect
Power	56.8 hp (41.8 kW)correct
Rated speed	2,200 rpmcorrect
Torque	204.1correct
Speed at max. torque	1,550 rpmcorrect
Cylinders	4correct
Displacement	3,331.5 cm³correct

Dimensions and weights

Ground clearance	362.7correct
Unladen weight	7,450 kgcorrect

Drivetrain and chassis

System voltage	12 Vcorrect

Working data

Pump flow	160.1 l/mincorrect
Hydraulic oil capacity	131.4 lcorrect
Hydraulic pressure	260 barcorrect
Fuel tank capacity	110.2 lcorrect

Other data

Height	2,587.8correct

Where this model stands

Power-to-weight ratio: 5.6 kW/t (42 kW / 7.5 t)

Stronger than 12% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Pel-Job EB706 have?

The Pel-Job EB706 delivers 56.8 hp.

How much does the Pel-Job EB706 weigh?

The unladen weight is 7,450 kg.

What engine does the Pel-Job EB706 have?

4 cylinders, 3,332 cm³ displacement.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →