Peiner Gis AK 058
Built: 1986 · Series: Other models
More machines from model year 1986
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Peiner Gis AK 058: crane chassis of vehicle class N3 on eight wheels, with an eight-cylinder diesel engine and a payload near zero signalling permanently mounted work equipment
Peiner was a German manufacturer known chiefly for truck-mounted and mobile cranes; chassis of this kind often carried a permanently fitted lifting mechanism rather than a conventional load bed. At this level of gross weight combined with a payload close to zero, the vehicle is typically not a transport vehicle in the ordinary sense but a mobile piece of working equipment.
Read on 3 more paragraphs
The eight-cylinder diesel engine drives a chassis 2,470 mm wide on eight wheels, with a wheelbase of 6,040 mm. With a kerb weight of 39,810 kg and a gross vehicle weight of 40,000 kg, only about 190 kg of payload remains – a figure that points to permanently mounted work equipment rather than to load transport.
With a gross vehicle weight of 40 tonnes, the chassis falls into vehicle class N3. Eight wheels on four axles are typical for crane chassis of this weight class, keeping each axle load within permitted limits despite the high overall weight. In the European Union, vehicles of this class are subject on public roads to the general 90 km/h speed limit.
When buying such a chassis used, besides the condition of the frame and axles, inspecting the mounted lifting mechanism matters most: cable condition, hydraulic cylinders and outriggers should be checked by a specialist workshop, since operating safety depends directly on them. Corrosion on load-bearing frame parts is a common weak point on vehicles of this age.
Sources: SpecCodex-Register: Kennwerte des Modells AK 058
Technical data
Engine
| Cylinders | 8correct |
|---|
Dimensions and weights
| Width | 2,470 mmcorrect |
|---|---|
| Wheelbase | 6,040 mmcorrect |
| Unladen weight | 39,810 kgcorrect |
| Gross vehicle weight | 40,000 kgcorrect |
Drivetrain and chassis
| Wheels | 8correct |
|---|
Frequently asked questions
How much does the Peiner Gis AK 058 weigh?
The unladen weight is 39,810 kg.
What is the gross vehicle weight of the Peiner Gis AK 058?
40,000 kg.
What engine does the Peiner Gis AK 058 have?
8 cylinders.
When was the Peiner Gis AK 058 built?
Production years: 1986.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
