Pavelli 3R30L13
Built: 2001-2001 · Series: Other models
More machines from model year 2001
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Pavelli – other models: the collective page of trailers and semi-trailers outside the named ranges, 2R and 3R plus 3S/S3 types from 1.5 to 33.6 t gross vehicle weight, lengths up to 14.9 m
This page gathers the Pavelli trailers and semi-trailers the register could not assign to a named range. In the type designations 2R10L900, 2R22L960, 3R30L13 and 3R30L14, the axle count 2R and 3R changes along with the following dimension and load figures; alongside these stand the types 3S32BT, 3S36B and S3BT plus the plain designation M2000.
Read on 3 more paragraphs
The register lists 10 versions here with kerb weights from 440 to 29,700 kg, gross vehicle weights from 1,500 to 33,600 kg, lengths from 8,250 to 14,900 mm and widths from 1,980 to 2,580 mm.
With gross weights reaching well over 30 t and lengths up to almost 15 m, the collective page spans trailers for medium payloads through to multi-axle semi-trailers and low-loaders for heavy transport, as used in construction and machinery haulage. The 2R or 3R axle count in the type designation rises with the gross vehicle weight, so buyers can already read the payload class off the code.
Buying used, the heavy semi-trailers call for a check of the frame and chassis rails for cracks and deformation, the axle units and brake system, air suspension, kingpin and support legs, and the condition of the load floor; the lighter models need the overrun brake mechanism, axle bearings and side boards checked. Spare parts run through the commercial-vehicle and trailer trade, though hydraulic components for older versions need extra lead time to source.
Technical data
Dimensions and weights
| Wheelbase | 940 mmcorrect |
|---|---|
| Unladen weight | 27,900 kgcorrect |
| Gross vehicle weight | 30,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Pavelli 3R30L13 weigh?
The unladen weight is 27,900 kg.
What is the gross vehicle weight of the Pavelli 3R30L13?
30,000 kg.
Up to what speed is the Pavelli 3R30L13 approved?
Approved up to 100 km/h.
When was the Pavelli 3R30L13 built?
Production years: 2001.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.