Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Patikima Linija › Other models › ADERO 2

Patikima Linija ADERO 2

Built: 2022 · Series: Other models

More machines from model year 2022

Source: new.abb.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The ADERO 2 comes from Patikima Linija. Production: 2022. The vehicle is 2,550 mm wide. The unladen weight is 6,700 kg. The wheelbase measures 737 mm. Top speed is 90 km/h. The gross vehicle weight is 18,000 kg. The vehicle runs on 8 wheels. Unladen weight across the Patikima Linija range ranges from 6,600 to 6,700 kg; the ADERO 2 sits at the top of that range with 6,700 kg. Its immediate neighbours are the RIMO PL5 below it with 6,600 kg. Gross vehicle weight across the Patikima Linija range ranges from 18,000 to 24,000 kg; here the ADERO 2 sits at the bottom of that range with 18,000 kg. 3 Patikima Linija models are on record.

Patikima Linija Adero 2 – EU class O4 trailer with an 18,000 kg gross weight, 2,550 mm width and eight wheels

Patikima Linija is Lithuanian for reliable line, so the company name comes from the Lithuanian-speaking world. With a gross weight of 18,000 kg, the Adero 2 falls into EU class O4, the heavy trailers and semi-trailers above 10 tonnes.

Read on 3 more paragraphs

The Adero 2 has an unladen weight of 6,700 kg, giving a payload of around 11,300 kg, at a width of 2,550 mm on eight wheels. The 737 mm figure given for this wheel count is the axle spacing within a multi-axle bogie, not the wheelbase of the whole trailer. The permitted top speed of 90 km/h is lower than usually seen on trailers.

Class O4 requires an air brake system, and towing requires driving licence category CE. Eight wheels on a multi-axle bogie spread the high payload widely across the road and are typical of heavy trailers working in commercial long-haul transport, regularly running close to the axle load limit.

When buying used, check the air brake and all eight tyres for even wear, inspect the axle suspension within the bogie for play, and check the chassis for cracks around the axle mountings. Given the high payload, the tie-down points on the load bed should also be checked for load capacity.

Sources: SpecCodex-Register: Kennwerte des Modells Patikima Linija Adero 2

Technical data

Dimensions and weights

Width2,550 mmcorrect
Wheelbase737 mmcorrect
Unladen weight6,700 kgcorrect
Gross vehicle weight18,000 kgcorrect

Drivetrain and chassis

Wheels8correct
Top speed90 km/hcorrect

Frequently asked questions

How much does the Patikima Linija ADERO 2 weigh?

The unladen weight is 6,700 kg.

What is the gross vehicle weight of the Patikima Linija ADERO 2?

18,000 kg.

Up to what speed is the Patikima Linija ADERO 2 approved?

Approved up to 90 km/h.

When was the Patikima Linija ADERO 2 built?

Production years: 2022.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare