Pasquali Ergo 3.30 AR
Series: Ergo
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Pasquali Ergo – the range page of the Italian articulated tractors from Calenzano, from the Ergo 3.30 AR to the Ergo 8.80 Series 2, 19 to 56 kW, VM and Lombardini engines
This page gathers the versions of the Pasquali Ergo range, built in Calenzano near Florence. Pasquali builds the Ergo range as articulated tractors with a low, split frame that allows a low seating position and good all-round visibility; the suffixes AR and RS and the designation Series 2 distinguish equipment and generation variants. The engines come from the Italian makers VM Motori and Lombardini.
Read on 3 more paragraphs
The register lists here 5 versions with 19 to 56 kW (25 to 75 hp); all models run on diesel.
Articulated tractors such as the Pasquali Ergo are widespread mainly in Italian fruit, wine and vegetable growing, where the low, narrow build allows work under tree canopies and in narrow rows. In this niche of narrow articulated specialist tractors, Pasquali competes with other Italian makers such as Goldoni and Carraro, which offer similar designs for the same crops.
On the used Ergo range, the condition of the articulation joint and steering hydraulics, the engine and injection pump of the VM or Lombardini unit, the clutch and PTO, and rust on the low-lying frame count; parts run through dealers specialising in Italian specialist tractors, with older Ergo models in particular needing the steering joints and the seals of the articulation hydraulics checked for play and leaks.
Sources: SpecCodex register, model data: Pasquali Ergo
Technical data
Engine
| Engine make | Lombardinicorrect |
|---|---|
| Fuel | dieselcorrect |
| Power | 25 hp (19 kW)correct |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | selectable four-wheel drivecorrect |
|---|
Origin and approval
| Plant | Italycorrect |
|---|
Frequently asked questions
How much power does the Pasquali Ergo 3.30 AR have?
The Pasquali Ergo 3.30 AR delivers 25 hp.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Tractor & Construction Plant Wiki (CC BY-SA 3.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
