Pacton TBZ 345
Built: 2006-2009 · Series: .TBZ
More machines from model year 2006
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Pacton .TBZ – semi-trailer range from the Dutch manufacturer: 20,000 to 45,000 kg gross weight, 7,560 to 11,540 kg unladen weight, 11.3 to 14.0 m length
This page gathers the TBZ range from the Dutch semi-trailer manufacturer Pacton of Werkendam. The models from .TBZ 230 to TBZ 345 use the number to give an approximate size or payload class, with the leading full stop on the older versions marking an earlier spelling of the type designation.
Read on 4 more paragraphs
The register lists here 8 versions with unladen weights from 7,560 to 11,540 kg, gross weights from 20,000 to 45,000 kg, lengths from 11,340 to 14,040 mm and a uniform width of 2,600 mm.
Spanning 20 to 45 tonnes, the TBZ range covers Pacton's whole standard programme between lighter two-axle versions and fully loaded three-axle versions and is used in haulage and rental for general cargo and palletised goods in European road transport.
As a class O4 semi-trailer, the TBZ range needs an air brake system with air suspension and is coupled to the tractor unit through a fifth-wheel coupling and kingpin; towing requires driving licence category CE. The exact axle count on semi-trailers of this size depends on the intended axle load and ranges from two-axle to three-axle versions.
On a used semi-trailer, the condition of the frame and cross members, corrosion at the welds, the braking system and air-suspension bellows, wear on the kingpin and landing legs, and the tyres and lighting system all count; parts run through Pacton itself and the usual trailer suppliers such as BPW and SAF.
Sources: SpecCodex register, model data: Pacton .TBZ
Technical data
Dimensions and weights
| Length | 14,000 mmcorrect |
|---|---|
| Width | 2,600 mmcorrect |
| Wheelbase | 9,810 mmcorrect |
| Unladen weight | 10,560 kgcorrect |
| Gross vehicle weight | 45,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Pacton TBZ 345 weigh?
The unladen weight is 10,560 kg.
What is the gross vehicle weight of the Pacton TBZ 345?
45,000 kg.
Up to what speed is the Pacton TBZ 345 approved?
Approved up to 100 km/h.
What are the dimensions of the Pacton TBZ 345?
14,000 mm × 2,600 mm.
When was the Pacton TBZ 345 built?
Production years: 2006-2009.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.