Orten SANH
Built: 2010 · Series: Other models
More machines from model year 2010
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Orten – other models: the collective page of Fahrzeugbau Orten of Bernkastel-Kues outside the named ranges, beverage and box bodies, unladen weight 1,020–7,050 kg, gross weight 1,300–29,000 kg
This collective page gathers trailers from Orten Fahrzeugbau of Bernkastel-Kues outside the named ranges, a manufacturer specialising in beverage and box bodies. The PRASQ 18 Getränkeanhänger names its purpose directly as a beverage trailer, COOLBOX denotes a refrigerated box body; ACA20, APT, SANH, ZAA18 and ZFPR18 round out the programme between light O2 and heavy O4 trailers.
Read on 3 more paragraphs
The register lists here 9 versions with unladen weights from 1,020 to 7,050 kg, permissible gross weights from 1,300 to 29,000 kg, lengths from 8,100 to 10,600 mm and widths from 2,000 to 2,550 mm.
The wide span runs from a light O2 beverage trailer to a heavy O4-class body above 10 tonnes for breweries and drinks distributors carrying refrigerated and unrefrigerated goods in crates and kegs to catering and retail; the larger versions need a lorry licence of the matching category for this. Buyers here are mainly haulage firms, construction and recycling operations, and rental fleets that rely on standardised axles and brake components from European suppliers.
Buying used beverage trailers, what counts is the tightness and corrosion of the box body, on the COOLBOX also the condition and output of the refrigeration unit, and generally the tail lift, brake system and axles against the gross weight and the condition of the roller-container rails inside the body; spares for the body and refrigeration technology run through Orten Fahrzeugbau directly. It is also worth checking the condition of the ABS or EBS electronics, the tightness of the wiring harnesses, and the lubrication and wear of the fifth wheel or axle stub ends.
Sources: SpecCodex register, model data: Orten (weitere Modelle)
Technical data
Dimensions and weights
| Length | 10,600 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 6,850 mmcorrect |
| Unladen weight | 7,050 kgcorrect |
| Gross vehicle weight | 29,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Orten SANH weigh?
The unladen weight is 7,050 kg.
What is the gross vehicle weight of the Orten SANH?
29,000 kg.
Up to what speed is the Orten SANH approved?
Approved up to 100 km/h.
What are the dimensions of the Orten SANH?
10,600 mm × 2,550 mm.
When was the Orten SANH built?
Production years: 2010.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
