Opel Mod Drst MOVANO POLYVOLUME
Built: 2014 · Series: Other models
More machines from model year 2014
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Opel Movano Polyvolume: high-volume box body with a 7,140 mm length, 3,500 kg gross weight and a 2.3-litre diesel engine, model year 2014
The base of this vehicle is an Opel Movano, a large chassis used for van and box bodies. The Polyvolume name here denotes a dedicated box body built for large load volume, which extends the vehicle well beyond the length of a standard panel van.
Read on 3 more paragraphs
The four-cylinder diesel engine displaces 2,299 cc. Gross vehicle weight is 3,500 kg, kerb weight with the body fitted 3,080 kg, leaving only around 420 kg of payload. Overall length is 7,140 mm, wheelbase 4,730 mm, width 2,150 mm. This version was registered in 2014.
At 3,500 kg gross weight the vehicle falls into EU class N1. The low payload relative to the vehicle's length shows that load volume, not load weight, is the point here, as is typical for distributing light but bulky goods on the last mile.
Buying a used high-volume box body like this, the body panels deserve attention for damage and moisture ingress, as do the mounting points fixing the body to the chassis for corrosion and secure attachment. Since overload is reached quickly on a vehicle with such low payload, it is also worth checking the braking system and tyre wear, which can be uneven on a vehicle habitually run close to its weight limit, and confirming that the conversion is properly registered against the base chassis, since mismatched paperwork on a body this large can be costly to put right afterwards.
Sources: SpecCodex-Register: Kennwerte des Modells Opel Movano Polyvolume
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 2,299 cm³correct |
Dimensions and weights
| Length | 7,140 mmcorrect |
|---|---|
| Width | 2,150 mmcorrect |
| Wheelbase | 4,730 mmcorrect |
| Unladen weight | 3,080 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Opel Mod Drst MOVANO POLYVOLUME weigh?
The unladen weight is 3,080 kg.
What is the gross vehicle weight of the Opel Mod Drst MOVANO POLYVOLUME?
3,500 kg.
What engine does the Opel Mod Drst MOVANO POLYVOLUME have?
4 cylinders, 2,299 cm³ displacement.
What are the dimensions of the Opel Mod Drst MOVANO POLYVOLUME?
7,140 mm × 2,150 mm.
When was the Opel Mod Drst MOVANO POLYVOLUME built?
Production years: 2014.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
