Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Omeps › cr 57 fa

Omeps cr 57 fa

Built: 2015-2015 · Series: Other models

More machines from model year 2015

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The cr 57 fa comes from Omeps. Production: 2015. The machine is 12,465 mm long and 2,550 mm wide. The unladen weight is 5,640 kg. The gross vehicle weight is 36,000 kg. Unladen weight across the Omeps range ranges from 3,350 to 9,400 kg; the cr 57 fa sits in the lower part of that range with 5,640 kg. Its immediate neighbours are the MCE 47 below it with 5,440 kg and the O.ME.P.S. FT38 above it with 6,000 kg. Gross vehicle weight across the Omeps range ranges from 24,000 to 46,500 kg; here the cr 57 fa sits in the middle of that range with 36,000 kg. 30 Omeps models across 2 series are on record.

Omeps – other models: heavy Italian semi-trailers outside the named ranges, unladen weights from 3,960 to 9,400 kg, gross weights from 33,000 to 46,500 kg, a constant 2,550 mm wide

O.ME.P.S. is, as the SRL suffix in one of the model names shows, an Italian company; the letter sequence in the company name survives on the model list as a type designation of its own. This page lists the semi-trailers the register could not assign to a named range, with CM, CR, FT and MCE types; the number sequence that follows gives the size or axle spacing.

Read on 3 more paragraphs

The register lists here 25 versions with unladen weights from 3,960 to 9,400 kg, gross weights from 33,000 to 46,500 kg, lengths from 8,930 to 15,265 mm and a constant width of 2,550 mm.

With gross weights up to 46.5 tonnes and lengths of over 15 metres, the vehicles sit in the range of heavy semi-trailers for special and heavy-haul transport; such trailers are used in Italian and central European building-material, machinery and heavy-goods transport alongside manufacturers such as Cometto and Faymonville.

When buying used, these semi-trailers call for checking the condition of the chassis and main beams, axles and braking system, kingpin and weld points, and, depending on the body, the tightness of the tipping hydraulics or tank; rust on underrun protection and mudguards is particularly safety-relevant on vehicles of this weight. Parts run through the general trailer-parts trade and axle makers such as BPW and SAF.

Sources: Kennwerte der Modelle Omeps (weitere Modelle)

Technical data

Dimensions and weights

Length12,465 mmcorrect
Width2,550 mmcorrect
Unladen weight5,640 kgcorrect
Gross vehicle weight36,000 kgcorrect

Frequently asked questions

How much does the Omeps cr 57 fa weigh?

The unladen weight is 5,640 kg.

What is the gross vehicle weight of the Omeps cr 57 fa?

36,000 kg.

What are the dimensions of the Omeps cr 57 fa?

12,465 mm × 2,550 mm.

When was the Omeps cr 57 fa built?

Production years: 2015.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare