Oil & Steel SNAKE 2413 PLUS
Built: 2019-2022 · Series: Other models
More machines from model year 2019
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Oil & Steel – other models: the collective page of aerial-platform bodies outside the named ranges, Scorpion and Snake on chassis up to 3.5 t, four-cylinder engines of 2.1 to 3.0 litres
This page gathers the Oil & Steel bodies the register could not assign to a named range. Oil & Steel, based in San Marino, builds aerial work platforms for mobile use – hydraulically extending work platforms mounted on van and truck chassis. The Scorpion and Snake ranges denote the maker's boom platforms, whose number suffixes give the working height in metres; the bodies listed here are throughout mounted on chassis up to 3.5 tonnes gross weight, still drivable on a category B licence.
Read on 3 more paragraphs
The register lists here 11 versions with four-cylinder engines of 2,143 to 2,953 cm³, unladen weights from 3,250 to 3,325 kg, a uniform gross weight of 3,500 kg, lengths from 6,310 to 8,080 mm and widths from 2,100 to 2,250 mm.
With this vehicle class Oil & Steel serves above all rental fleets, electrical and tree-care contractors and municipalities that need a manoeuvrable, category-B platform for work on façades, trees and overhead lines; competitors are Palfinger Platforms, CTE and Multitel.
On used units, the condition and tightness of the hydraulic cylinders and hoses, wear at the boom joints and the basket slew ring, the currency of the periodic platform inspection and rust on the chassis under the body all count; parts for hydraulics and controls come from Oil & Steel itself, the carrier chassis through the vehicle brand.
Sources: SpecCodex register, model data: Oil & Steel (weitere Modelle)
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 2,953 cm³correct |
Dimensions and weights
| Length | 7,270 mmcorrect |
|---|---|
| Width | 2,210 mmcorrect |
| Wheelbase | 4,100 mmcorrect |
| Unladen weight | 3,325 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 160 km/hcorrect |
Frequently asked questions
How much does the Oil & Steel SNAKE 2413 PLUS weigh?
The unladen weight is 3,325 kg.
What is the gross vehicle weight of the Oil & Steel SNAKE 2413 PLUS?
3,500 kg.
What engine does the Oil & Steel SNAKE 2413 PLUS have?
4 cylinders, 2,953 cm³ displacement.
What are the dimensions of the Oil & Steel SNAKE 2413 PLUS?
7,270 mm × 2,210 mm.
When was the Oil & Steel SNAKE 2413 PLUS built?
Production years: 2019-2022.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
1 current listings for Oil & Steel SNAKE 2413 PLUS on Hutnia.com.
View offers on Hutnia.com →
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
