Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Nuffield › PM-4

Nuffield PM-4

Built: 1951–1957 · Series: Universal

More machines from model year 1951

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The PM-4 from Nuffield is part of the Universal series. Production: 1951–1957. The engine delivers 48.7 hp (35.8 kW), has 4 cylinders, with a displacement of 3,770 cm³. Torque is 200 Nm. Rated speed is 2,000 rpm. The machine is 3,086 mm long, 1,753 mm wide and 2,051 mm high. The unladen weight is 2,062 kg. The wheelbase measures 1,981 mm. Ground clearance is 432 mm. Top speed is 28 km/h. The tank holds 63.6 litres. Transmission: 5 V/1 R. The engine is water-cooled. Tyres: front 6.00-16 ASF, rear 11.00-36 AS. The fuel is petrol. The bore measures 100 mm. The stroke is 120 mm. The compression ratio is 6:1. Maximum torque is reached at 1,000 rpm. Construction: semi-frame construction. The gearbox offers 5 forward gears. There are also 1 reverse gears. The linkage is category I. The Universal series covers 16 models. Rated output within it ranges from 35 to 54.7 hp; the PM-4 sits in the upper part of that range with 48.7 hp. Its immediate neighbours are the DM-4 below it with 45.6 hp and the UNIVERSAL-4 (4 DM) above it with 54.7 hp. Unladen weight within it ranges from 1,840 to 2,266 kg; here the PM-4 sits in the middle of that range with 2,062 kg. 60 Nuffield models across 5 series are on record.

Nuffield Universal (1948–1969) – the tractor of the Morris group: M3 and M4, DM4 and PM4, Universal Three and Four, BMC engines, kerosene to diesel, 26 to 41 kW

The Nuffield Universal was the tractor with which Lord Nuffield's Morris group entered farm machinery in 1948 – named after William Morris, Viscount Nuffield, and built first in Birmingham, from 1961 at the new BMC plant in Bathgate, Scotland. The type logic of the early years is a code system: M3 and M4 denote the Universal models with three and four wheels in row-crop and standard form, PM4 the petrol or kerosene engine (Petrol Morris), DM4 the diesel (Diesel Morris) – first a Perkins P4, from 1954 BMC's own 3.4-litre diesel. In 1957 the Universal Three brought a three-cylinder diesel for the smaller class, while the Universal Four remained the main model; suffixes such as 3DL and 4DM mark the versions. In 1969 Nuffield and BMC merged into Leyland, and the tractors continued as Leyland.

Read on 3 more paragraphs

The register lists 16 versions with 25.6 to 41 kW (28 to 49 hp), 2,550 to 4,425 cm³ with three or four cylinders, torque from 146 to 206 Nm, unladen weights from 1,760 to 2,650 kg, lengths from 2,820 to 3,295 mm, widths from 1,710 to 2,100 mm and heights from 1,562 to 2,051 mm; fuels range from kerosene and petrol on the early to diesel on the late models.

The Universal was Ferguson's and Fordson's British rival in the 40 hp class and was known for its orange livery, the engine from the Morris truck programme and the robust construction that keeps many examples running to this day.

Used Nuffields are sought-after British collector tractors; when buying, engine condition, originality of sheet metal and paint, gearbox and hydraulics and parts supply through the active Nuffield and Leyland club scene are what count.

Sources: SpecCodex register, model data: Nuffield Universal, Nuffield Universal (Wikipedia)

Technical data

Engine

Fuelpetrolcorrect
Power48.7 hp (35.8 kW)correct
Rated speed2,000 rpmcorrect
Torque200 Nmcorrect
Speed at max. torque1,000 rpmcorrect
Cylinders4correct
Displacement3,770 cm³correct
Bore100 mmcorrect
Stroke120 mmcorrect
Compression ratio6correct
Coolingwater-cooledcorrect

Dimensions and weights

Length3,086 mmcorrect
Width1,753 mmcorrect
Height2,051 mmcorrect
Wheelbase1,981 mmcorrect
Ground clearance432 mmcorrect
Unladen weight2,062 kgcorrect

Drivetrain and chassis

Driverear-wheel drivecorrect
Gearbox5 V/1 Rcorrect
Forward gears5correct
Reverse gears1correct
Front tyres6.00-16 ASFcorrect
Rear tyres11.00-36 AScorrect
Top speed28 km/hcorrect

Working data

Fuel tank capacity63.6 lcorrect

Origin and approval

Constructionsemi-frame constructioncorrect

Other data

Linkage categoryCat Icorrect

Where this model stands

Power-to-weight ratio: 17.4 kW/t (36 kW / 2.1 t)

Power class: Universal (40–100 hp)

Stronger than 33% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Nuffield PM-4 have?

The Nuffield PM-4 delivers 48.7 hp.

How much does the Nuffield PM-4 weigh?

The unladen weight is 2,062 kg.

What engine does the Nuffield PM-4 have?

4 cylinders, 3,770 cm³ displacement, Benzin.

How fast does the Nuffield PM-4 go?

Top speed is 28 km/h.

What are the dimensions of the Nuffield PM-4?

3,086 mm × 1,753 mm × 2,051 mm.

When was the Nuffield PM-4 built?

Production years: 1951–1957.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 29 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare