Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Nordberg › NW › NW 500GP

Nordberg NW 500GP

Built: 2012 · Series: NW

More machines from model year 2012

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Nordberg NW 500GP is a vehicle built by Nordberg. Production: 2012. The vehicle is 15,220 mm long and 3,500 mm wide. The unladen weight is 38,850 kg. The gross vehicle weight is 60,000 kg. Unladen weight across the Nordberg range ranges from 9,500 to 48,000 kg; the NW 500GP sits in the upper part of that range with 38,850 kg. Its immediate neighbours are the C 110 below it with 36,000 kg and the NW 550 above it with 39,000 kg. 21 Nordberg models are on record.

Nordberg NW 550: mobile crushing or screening plant on a heavy-duty chassis with a 55,000 kg gross weight, 39,000 kg unladen weight and 3,490 mm width

The NW series from Nordberg denotes mobile crushing and screening plants on their own chassis, used in aggregate processing and recycling. The NW 550 model has a gross weight of 55,000 kg and therefore falls into EU trailer class O4, the heavy trailers above 10 tonnes.

Read on 3 more paragraphs

The chassis alone weighs 39,000 kg, leaving a payload of 16,000 kg for the crushing unit, drive and superstructure. At a width of 3,490 mm and a length of 16,600 mm, the plant exceeds the normal road gauge and needs a special transport permit. The plant was registered in 2010.

Mobile crushing or screening plants of this size crush or sort stone, demolition rubble and recycled material directly on site and are moved between construction sites or quarries with a heavy towing vehicle. Because of the high gross weight, the chassis runs on air brakes on all axles.

When buying used, the condition of the crushing or screening unit itself matters most: wear on the crusher jaws, screen decks or conveyor belts drives the highest running costs. Also check the drive and hydraulics, the chassis frame for cracks at the axle mounts, and the braking system, which should be inspected especially carefully given this weight. It is also worth checking the tyres and rims on every axle, which carry an especially high load given the plant's overall weight, and the condition of the towing eye and lighting.

Sources: SpecCodex-Register: Kennwerte des Modells Nordberg NW 550

Technical data

Dimensions and weights

Length15,220 mmcorrect
Width3,500 mmcorrect
Unladen weight38,850 kgcorrect
Gross vehicle weight60,000 kgcorrect

Frequently asked questions

How much does the Nordberg NW 500GP weigh?

The unladen weight is 38,850 kg.

What is the gross vehicle weight of the Nordberg NW 500GP?

60,000 kg.

What are the dimensions of the Nordberg NW 500GP?

15,220 mm × 3,500 mm.

When was the Nordberg NW 500GP built?

Production years: 2012.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare