Nik Kioleides H903BC32
Built: 2007 · Series: Other models
More machines from model year 2007
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Nik Kioleides H903BC32: lightweight heavy-duty trailer in EU class O4 with a 37,000 kg gross weight, 5,000 kg unladen weight and a 32,000 kg payload over 9,750 mm length
The H903BC32 from Nik Kioleides is a heavy-duty trailer with a gross weight of 37,000 kg. It falls into EU trailer class O4, the heavy trailers and semi-trailers above 10 tonnes towed behind articulated or heavy tractor units on long-distance routes.
Read on 3 more paragraphs
At a length of 9,750 mm and a width of 2,550 mm, the empty chassis weighs just 5,000 kg, leaving a payload of 32,000 kg – more than six times its own weight. This combination of a light chassis and high load capacity is typical of flatbed and low-loader trailers built to carry construction machinery, steel or bulk material. The 8,150 mm wheelbase spreads the axle load along the full length. The trailer was registered in 2007.
Trailers in this class run on air brakes on all axles and need a towing vehicle with a sufficiently high permitted trailer load and a matching compressed-air supply. The low unladen weight combined with a high permitted payload calls for a sturdy yet light frame construction, needed for economical transport of heavy goods.
When buying used, the condition of the frame matters most: on a light chassis with a high permitted payload, overload damage first shows up as cracks in the longitudinal beams and axle mounts. Equally important are the brake drums or discs, the tightness of the air lines, and the condition of the load bed, which is heavily stressed by frequent contact with construction machinery and bulk material.
Sources: SpecCodex-Register: Kennwerte des Modells Nik Kioleides H903BC32
Technical data
Dimensions and weights
| Length | 9,750 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 8,150 mmcorrect |
| Unladen weight | 5,000 kgcorrect |
| Gross vehicle weight | 37,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Nik Kioleides H903BC32 weigh?
The unladen weight is 5,000 kg.
What is the gross vehicle weight of the Nik Kioleides H903BC32?
37,000 kg.
Up to what speed is the Nik Kioleides H903BC32 approved?
Approved up to 100 km/h.
What are the dimensions of the Nik Kioleides H903BC32?
9,750 mm × 2,550 mm.
When was the Nik Kioleides H903BC32 built?
Production years: 2007.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.