Nfp Eurotrailer SAT UE20
Built: 2008 · Series: Other models
More machines from model year 2008
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
NFP-Eurotrailer – other models: the collective page of semi-trailers outside the named ranges, SAT UE20 and SKS 27-7.5, 7,120 to 8,450 kg unladen weight, 35,000 to 36,500 kg gross weight
This page gathers the NFP-Eurotrailer semi-trailers the register could not assign to a named range. The company, based in Barsbüttel near Hamburg, builds semi-trailers, and the type SAT UE20 already carries its build form in the SAT prefix for semi-trailer (Sattelauflieger); SKS 27-7.5 follows its own code of letters and numbers. As with many smaller semi-trailer makers, the values are drawn from registration data, in which each model is listed individually with its technical figures.
Read on 3 more paragraphs
The register lists here 2 versions with unladen weights from 7,120 to 8,450 kg, gross weights from 35,000 to 36,500 kg, lengths from 8,700 to 12,470 mm and widths from 2,500 to 2,550 mm.
With gross weights of 35 to 36.5 tonnes, both semi-trailers fall into the range of articulated combinations typical in Europe for long-haul transport; the length span of 8.7 to 12.47 metres shows clearly different bodies, from a shorter model to one using nearly the full permitted semi-trailer length.
On a used semi-trailer, axle and brake system condition, the function of brake valves and air lines, the state of the kingpin plate and landing legs, corrosion on load-bearing parts, and tyre and rim condition all count. Parts for such a small maker usually run through independent commercial-vehicle workshops rather than a maker's own network.
Sources: SpecCodex register, model data: NFP-Eurotrailer (weitere Modelle)
Technical data
Dimensions and weights
| Length | 12,470 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 9,030 mmcorrect |
| Unladen weight | 8,450 kgcorrect |
| Gross vehicle weight | 36,500 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Nfp Eurotrailer SAT UE20 weigh?
The unladen weight is 8,450 kg.
What is the gross vehicle weight of the Nfp Eurotrailer SAT UE20?
36,500 kg.
Up to what speed is the Nfp Eurotrailer SAT UE20 approved?
Approved up to 100 km/h.
What are the dimensions of the Nfp Eurotrailer SAT UE20?
12,470 mm × 2,550 mm.
When was the Nfp Eurotrailer SAT UE20 built?
Production years: 2008.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
