StartTractorsNew Holland › Workmaster 40

New Holland Workmaster 40 2WD

Series: WORKMASTER™

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The New Holland Workmaster 40 is a tractor from the New Holland 2WD Tractor series. The three-cylinder engine, displacing 1.9 litres, produces 41 hp (29.8 kW). With a rated speed of 2,600 rpm, it is built for pulling power, not for revving.

Wheelbase is 1.71 m.

Within the range, rated power spans from 25 to 157 hp; with 40.6 hp, the Workmaster 40 sits at the bottom end. Directly alongside are the Boomer-37 with 36.7 hp below and the Boomer 41 with 41.3 hp above.

Technical data

Engine

Power40.6 hp (29.8 kW)correct
Rated speed2,600 rpmcorrect
Cylinders3correct
Displacement1,879.6 cm³correct
Aspirationturbochargedcorrect

Dimensions and weights

Wheelbase1,714.5correct

Other data

Height2,227.6correct

Frequently asked questions

How much power does the New Holland Workmaster 40 have?

The New Holland Workmaster 40 delivers 40.6 hp.

What engine does the New Holland Workmaster 40 have?

3 cylinders, 1,880 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare