StartTractorsNew Holland › Workmaster 25

New Holland Workmaster 25 2WD

Series: WORKMASTER™

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The New Holland Workmaster 25 is a tractor from the New Holland 2WD Tractor series. Power comes from a three-cylinder engine; from 1.3 litres it draws 25 hp (18.4 kW). Rated power arrives at 2,500 rpm — the engine pulls from low down rather than needing to be revved.

Wheelbase is 1.67 m.

Within the range, rated power spans from 25 to 157 hp; with 25 hp, the Workmaster 25 sits at the bottom end. The next one up is the Workmaster 35 with 35.5 hp.

Technical data

Engine

Power25 hp (18.4 kW)correct
Rated speed2,500 rpmcorrect
Cylinders3correct
Displacement1,317.5 cm³correct
AspirationNaturalcorrect

Dimensions and weights

Wheelbase1,674.1correct

Working data

PTO speed540correct

Other data

Cab height2,241correct

Frequently asked questions

How much power does the New Holland Workmaster 25 have?

The New Holland Workmaster 25 delivers 25 hp.

What engine does the New Holland Workmaster 25 have?

3 cylinders, 1,318 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare