Technical register for agricultural, construction and commercial machinery · sourced data
StartWheel loadersNew Holland › W70TC

New Holland W70TC

Series: New Holland Wheel Loader

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The W70TC from New Holland is part of the New Holland Wheel Loader series. The engine delivers 45.5 kW, has 4 cylinders, with a displacement of 3,113.5 cm³. Rated speed is 2,500 rpm. The unladen weight is 5,045 kg. The wheelbase measures 2,350 mm. Ground clearance is 332.2 mm. The tank holds 100.3 litres. The gearbox has 2 forward gears. There are also 2 reverse gears. The pump delivers 67 l/min. The hydraulic tank holds 67 litres. The electrical system runs on 12 V. The engine fitted is the BF4M2011. Tyre size: 365/80 R20. The New Holland Wheel Loader series covers 42 models. Rated output within it ranges from 33.6 to 239.4 kW; the W70TC sits at the bottom of that range with 45.5 kW. Its immediate neighbours are the W60TC below it with 44.7 kW and the LW80.B above it with 52.9 kW. 502 New Holland models across 32 series are on record. The model is listed under Wheel loaders. 18 verified figures from 1 source are on file.

New Holland W wheel loaders: what the number after the W actually means

New Holland has labelled its wheel loaders with a "W" plus a size-class number for decades, spanning compact yard loaders to large construction machines. Across the 42 W-series models in the SpecCodex database, engine output ranges from 33 to 239 kW and operating weight from 4,553 to 23,660 kg; low numbers such as W60 or W70 denote small, agile machines, while high ones like W230 and W270 mark heavy earthmoving equipment.

Read on 3 more paragraphs

The number is often followed by a letter (B, C or D) marking the generation and emissions stage — current C and D models meet Stage V, while earlier B variants come from older emissions tiers. On smaller loaders the suffix "TC" also appears, standing for "Tool Carrier", a version with an extended attachment interface.

When buying used, check the hours on the hydraulic quick-coupler, the condition of the articulation joint and pivot bearings, and test the lift and tilt cylinders under load. Models such as W110, W170 and W190 are the most commonly traded mid-size classes.

Number and letter need to be read together — only combined do they reveal the size class and technical generation of a given machine.

Sources: Kennwerte der Modelle New Holland Wheel Loader, – New Holland W130D, Herstellerseite, – New Holland Wheel Loader Modellübersicht, RitchieSpecs, – New Holland W50C TC, RitchieSpecs (TC = Tool Carrier)

Technical data

Engine

Engine modelBF4M2011correct
Power45.5 kWcorrect
Rated speed2,500 rpmcorrect
Cylinders4correct
Displacement3,113.5 cm³correct
AspirationNaturalcorrect

Dimensions and weights

Wheelbase2,350correct
Ground clearance332.2correct
Unladen weight5,045 kgcorrect

Drivetrain and chassis

Gearbox typehydrostatic transmissioncorrect
Forward gears2correct
Reverse gears2correct
Tyre size365/80 R20correct
Turning radius4,600 mmcorrect

Working data

Pump flow67 l/mincorrect
Hydraulic oil capacity67 lcorrect
Fuel tank capacity100.3 lcorrect

Other data

Cab height2,801.1correct
System voltage12 Vcorrect

More machines with this engine (BF4M2011, 8)

Where this model stands

Power-to-weight ratio: 9 kW/t (46 kW / 5 t)

Stronger than 14% of the wheel loaders in the register — out of 1,251 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the New Holland W70TC have?

The New Holland W70TC delivers 45.5 kW.

How much does the New Holland W70TC weigh?

The unladen weight is 5,045 kg.

What engine does the New Holland W70TC have?

4 cylinders, 3,114 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 19 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Wheel loader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare