New Holland Geotech TL 100 (A)
Built: 1998–2004 · Series: TL-Baureihe
More machines from model year 1998
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
New Holland Geotech TL range – mid-range tractors TL 70 to TL 100 from the Jesi plant, 48 to 70 kW, four-cylinder engines of 3,613 to 3,908 cm³
The Geotech TL range brings together New Holland's mid-range tractors TL 70, TL 80 and TL 100, built in the 1990s at the Jesi plant in Italy – the same site where Fiat had already built the group's mid-range and specialist tractors. The type number follows the logic common to Fiat and New Holland, roughly denoting the power class in hp, while the A suffix marks the four-wheel-drive version of each model.
Read on 3 more paragraphs
The register lists here 3 versions with 47.8 to 69.9 kW from four-cylinder engines of 3,613 to 3,908 cm³, torque from 231 to 332 Nm at 2,500 rpm, unladen weights from 3,765 to 4,150 kg, lengths from 4,280 to 4,430 mm, widths from 2,005 to 2,009 mm and heights from 2,475 to 2,550 mm.
In this power class the TL range competed in the mid-1990s with the mid-range tractors of Deutz-Fahr, Massey Ferguson, Case IH and Landini; as a versatile yard and field tractor it filled the gap between the brand's smaller compact models and its large field tractors, with a conventional cab and mechanically shifted transmission.
On a used TL, the condition of the clutch and shuttle transmission, the tightness of the hydraulics and PTO, rust on the wings, steps and chassis, and the condition of the cab seals and the simple electrics of this era all count; parts run through the New Holland network. A service history documenting regular oil, filter and hydraulic fluid changes is a good sign on a tractor of this age.
Sources: SpecCodex register, model data: New Holland Geotech TL-Baureihe, New Holland Agriculture (manufacturer)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 95 hp (69.9 kW)correct |
| Rated speed | 2,500 rpmcorrect |
| Torque | 332 Nmcorrect |
| Speed at max. torque | 1,550 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 3,908 cm³correct |
| Bore | 104 mmcorrect |
| Stroke | 115 mmcorrect |
| Compression ratio | 16.5correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 4,430 mmcorrect |
|---|---|
| Width | 2,009 mmcorrect |
| Height | 2,550 mmcorrect |
| Wheelbase | 2,342 mmcorrect |
| Ground clearance | 440 mmcorrect |
| Unladen weight | 3,765 kgcorrect |
Drivetrain and chassis
| Drive | rear- or four-wheel drivecorrect |
|---|---|
| Gearbox | 20 V/12 R, 24 V/12 R and 24 V/24 Rcorrect |
| Front tyres | 7.50-20 ASF (A: 380/70 R 24 AS)correct |
| Rear tyres | 480/70 R 34 AScorrect |
| Top speed | 30 km/hcorrect |
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|
Where this model stands
Power-to-weight ratio: 18.6 kW/t (70 kW / 3.8 t)
Power class: Universal (40–100 hp)
Stronger than 63% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the New Holland Geotech TL 100 (A) have?
The New Holland Geotech TL 100 (A) delivers 95 hp.
How much does the New Holland Geotech TL 100 (A) weigh?
The unladen weight is 3,765 kg.
What engine does the New Holland Geotech TL 100 (A) have?
4 cylinders, 3,908 cm³ displacement, Diesel.
How fast does the New Holland Geotech TL 100 (A) go?
Top speed is 30 km/h.
What are the dimensions of the New Holland Geotech TL 100 (A)?
4,430 mm × 2,009 mm × 2,550 mm.
When was the New Holland Geotech TL 100 (A) built?
Production years: 1998–2004.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.