Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › New Holland › Other models › TD75D

New Holland TD75D

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The New Holland TD75D is a machine built by New Holland. The engine delivers 73 hp (54 kW), has 4 cylinders, with a displacement of 3,613 cm³. Torque is 208 Nm. Rated speed is 2,500 rpm. The machine is 1,928 mm wide and 2,472 mm high. The tank holds 92 litres. Transmission: 12 V/12 R, 20 V/12 R and 12 V/4 R. The engine is water-cooled. The model was built in Ankara, Turkey. The fuel is diesel. The linkage is category I/II. Rated output across the New Holland range ranges from 24 to 613 hp; the TD75D sits at the bottom of that range with 73 hp. Its immediate neighbours are the TN70DA below it with 72 hp and the T4.75 Powerstar above it with 75 hp. Rated output across the New Holland range ranges from 18 to 457 kW; here the TD75D sits at the bottom of that range with 54 kW. 1448 New Holland models across 71 series are on record.

New Holland – other models: the collective page of tractors outside the named ranges, from the Fiat heritage (80-66, 110-90) through the Ford 40 and 70 series (7740, 8340, 8670) to the 9x82 and T9, 14 to 457 kW, NEF

This page gathers the New Holland tractors the register could not assign to a named range – and it shows the brand's three roots: Fiat of Turin, Ford of Basildon and Versatile of Winnipeg. New Holland, founded in 1895 as a farm-machinery works in Pennsylvania, was joined with Ford Tractor in 1986 into Ford New Holland and bought by Fiat in 1991, which merged with Case as CNH from 1999; the blue tractors of the 1990s therefore carry three type logics. The Fiat types such as 80-66 and 110-90 give the hp class before and the series after the hyphen; the Ford 40 (5640 to 8340) and 70 (8670 to 8970) series from Basildon and Antwerp give the power in the middle digits and the series in the last, with SLE and SL as equipment lines; the articulated 9282 to 9882 and the later T9 come from Winnipeg and Fargo. From 2007 the T logic applies: T4 to T9 as ranges, the following digits as power (T6.140 about 140 hp). The engines are Fiat's 8000 series, Ford's Genesis, FPT's NEF and Cursor and Cummins in the articulated tractors.

Read on 3 more paragraphs

The register lists here 578 versions with 13.8 to 457 kW from three- to six-cylinders of 954 to 15,001 cm³, PTO outputs from 15 to 530 hp, lift capacities from 574 to 8,900 kg, unladen weights from 652 to 25,401 kg, gross weights from 3,000 to 18,000 kg, lengths from 2,700 to 8,005 mm and widths from 1,082 to 4,060 mm.

New Holland is Europe's second-largest tractor brand after John Deere and in the top three in Italy, Spain, France, Britain and Turkey; the brand also carries the specialist tractors from Jesi and the Boomer compact class from Japan.

On used tractors, clutch and shuttle count on Fiat types, electronics and powershift on the Ford 40 and 70 series, transmission and tyres on the articulated tractors, and on the T ranges operating hours, common-rail injection and exhaust aftertreatment; parts run through CNH.

Sources: SpecCodex register, model data: New Holland (weitere Modelle), New Holland Agriculture (manufacturer)

Technical data

Engine

Fueldieselcorrect
Power73 hp (54 kW)correct
Rated speed2,500 rpmcorrect
Torque208 Nmcorrect
Cylinders4correct
Displacement3,613 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Width1,928 mmcorrect
Height2,472 mmcorrect

Drivetrain and chassis

Driverear-wheel driveWD/MFWDcorrect
Gearbox12 V/12 R, 20 V/12 R and 12 V/4 Rcorrect

Working data

Fuel tank capacity92 lcorrect

Origin and approval

PlantAnkara, Turkeycorrect

Other data

Linkage categoryCat I/IIcorrect

Frequently asked questions

How much power does the New Holland TD75D have?

The New Holland TD75D delivers 73 hp.

What engine does the New Holland TD75D have?

4 cylinders, 3,613 cm³ displacement, Diesel.

What are the dimensions of the New Holland TD75D?

1,928 mm × 2,472 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Tractor & Construction Plant Wiki (retrieved August 2026) · Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved September 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare